Tuesday, 02 September, 2025
PL1 Plenary Lecture: Rainald Löhner
Main Organizer: Prof. Rainald Löhner (George Mason University, United States)
Main Organizer: Prof. Rainald Löhner (George Mason University, United States)
Chaired by:
Prof. Djordje Peric (Swansea University, United Kingdom , United Kingdom)
Prof. Djordje Peric (Swansea University, United Kingdom , United Kingdom)
PL2 Plenary Lecture: Sjoerd Van der Veen
Main Organizer: Mr. Sjoerd Van der Veen (Airbus Opérations SAS, France)
Main Organizer: Mr. Sjoerd Van der Veen (Airbus Opérations SAS, France)
Chaired by:
Prof. Djordje Peric (Swansea University, United Kingdom , United Kingdom)
Prof. Djordje Peric (Swansea University, United Kingdom , United Kingdom)
303A Mechanical Properties and Plasticity of Small-scale Materials I
Main Organizer: Dr. Matteo Ghidelli (CNRS/LSPM, France) Co-Organizer: Hosni Idrissi (Université Catholique de Louvain, Belgium)
Main Organizer: Dr. Matteo Ghidelli (CNRS/LSPM, France) Co-Organizer: Hosni Idrissi (Université Catholique de Louvain, Belgium)
Chaired by:
Dr. Matteo Ghidelli (CNRS/LSPM , France)
Dr. Matteo Ghidelli (CNRS/LSPM , France)
A67A Design and Physics-Enforced Modeling of Materials with Machine Learning I
Main Organizer: Dr. Knut Andreas Meyer (Chalmers University of Technology, Sweden)
Main Organizer: Dr. Knut Andreas Meyer (Chalmers University of Technology, Sweden)
Chaired by:
Dr. Knut Andreas Meyer (Chalmers University of Technology , Sweden)
Dr. Knut Andreas Meyer (Chalmers University of Technology , Sweden)
1509A Multiscale Modelling and Characterisation ㏌ Structural Materials I
Main Organizer: Prof. Ikumu Watanabe (National Institute for Materials Science, Japan)
Main Organizer: Prof. Ikumu Watanabe (National Institute for Materials Science, Japan)
Chaired by:
Prof. Ikumu Watanabe (National Institute for Materials Science , Japan) , Dr. Keita Kambayashi (Nagaoka University of Technology , Japan)
Prof. Ikumu Watanabe (National Institute for Materials Science , Japan) , Dr. Keita Kambayashi (Nagaoka University of Technology , Japan)
602 Advances in Computational Damage Modelling and Twinning for Composite Materials
Main Organizer: Prof. Savvas Triantafyllou (NTUA, Greece)
Main Organizer: Prof. Savvas Triantafyllou (NTUA, Greece)
Chaired by:
Prof. Savvas Triantafyllou (NTUA , Greece)
Prof. Savvas Triantafyllou (NTUA , Greece)
609 Influence of residual stresses on the fatigue behaviour of additive manufactured samples
Main Organizer: Dr. Huseyin AYDIN (The Scientific and Technological Research Council of Türkiye (TUBITAK), Turkey)
Main Organizer: Dr. Huseyin AYDIN (The Scientific and Technological Research Council of Türkiye (TUBITAK), Turkey)
Chaired by:
Dr. Huseyin AYDIN (The Scientific and Technological Research Council of Türkiye (TUBITAK) , Turkey) , Dr. Andreas Lundbäck (Luleå University of Technology , Sweden) , Phd. Sergio Jiménez (CIMNE , Spain)
Dr. Huseyin AYDIN (The Scientific and Technological Research Council of Türkiye (TUBITAK) , Turkey) , Dr. Andreas Lundbäck (Luleå University of Technology , Sweden) , Phd. Sergio Jiménez (CIMNE , Spain)
1604 Coupled Mechanics and Material Modelling in Multiphysics and Extreme Environments
Main Organizer: Prof. Antonio Gil (Swansea University, United Kingdom)
Main Organizer: Prof. Antonio Gil (Swansea University, United Kingdom)
Chaired by:
Prof. Javier Bonet (CIMNE , Spain)
Prof. Javier Bonet (CIMNE , Spain)
601A Plastic Instabilities, Ductile Damage, and Fracture I
Main Organizer: Phd. Lars Edvard Blystad Dæhli (Norwegian University of Science and Technology, Norway)
Main Organizer: Phd. Lars Edvard Blystad Dæhli (Norwegian University of Science and Technology, Norway)
Chaired by:
Dr. Jose Rodriguez-Martinez (University Carlos III of Madrid , Spain) , Dr. Borja Erice (Mondragon Unibertsitatea , Spain)
Dr. Jose Rodriguez-Martinez (University Carlos III of Madrid , Spain) , Dr. Borja Erice (Mondragon Unibertsitatea , Spain)
1002 Probabilistic Approaches applied to Numerical Geomechanics
Main Organizer: Prof. Stephane Commend (HES-SO, University of Applied Sciences Western Switzerland, Fribourg, Switzerland)
Main Organizer: Prof. Stephane Commend (HES-SO, University of Applied Sciences Western Switzerland, Fribourg, Switzerland)
Chaired by:
Prof. Stephane Commend (HES-SO, University of Applied Sciences Western Switzerland, Fribourg , Switzerland)
Prof. Stephane Commend (HES-SO, University of Applied Sciences Western Switzerland, Fribourg , Switzerland)
1701A Advanced Modeling and Numerical Methods for the Nonlinear Analysis of Beam and Shell Structures I
Main Organizer: Prof. Giovanni Garcea (University of Calabria, Italy)
Main Organizer: Prof. Giovanni Garcea (University of Calabria, Italy)
Chaired by:
Prof. Giovanni Garcea (University of Calabria , Italy) , Dr. Domenico Magisano (Università della Calabria , Italy)
Prof. Giovanni Garcea (University of Calabria , Italy) , Dr. Domenico Magisano (Università della Calabria , Italy)
1302 Applications of Computational Methods to Product and Process Design for Industry
Main Organizer: Dr. Takahiro Makiyama (Institute of Technologists, Japan)
Main Organizer: Dr. Takahiro Makiyama (Institute of Technologists, Japan)
Chaired by:
Dr. Takahiro Makiyama (Institute of Technologists , Japan) , Dr. Shohei Kajikawa (The University of Electro-Communications , Japan)
Dr. Takahiro Makiyama (Institute of Technologists , Japan) , Dr. Shohei Kajikawa (The University of Electro-Communications , Japan)
607 Coupled models for environmentally assisted damage
Main Organizer: Dr. Sasa Kovacevic (University of Oxford, United Kingdom)
Main Organizer: Dr. Sasa Kovacevic (University of Oxford, United Kingdom)
Chaired by:
Dr. Daniel Höche (Helmholtz-Zentrum hereon , Germany) , Dr. Sasa Kovacevic (University of Oxford , United Kingdom)
Dr. Daniel Höche (Helmholtz-Zentrum hereon , Germany) , Dr. Sasa Kovacevic (University of Oxford , United Kingdom)
203 Investigation on the distortional hardening/softening in metals, polymers, biological materials, and other materials
Main Organizer: Prof. Li-Wei Liu (National Taiwan University, Taiwan)
Main Organizer: Prof. Li-Wei Liu (National Taiwan University, Taiwan)
Chaired by:
Prof. Li-Wei Liu (National Taiwan University , Taiwan)
Prof. Li-Wei Liu (National Taiwan University , Taiwan)
1101 Computational Mechanics in Industry: From Multiscale to Data-driven Approaches
Main Organizer: Dr. Javier Gomez (ADVANCED MATERIAL SIMULATION, Spain)
Main Organizer: Dr. Javier Gomez (ADVANCED MATERIAL SIMULATION, Spain)
Chaired by:
Dr. Javier Gomez (ADVANCED MATERIAL SIMULATION , Spain) , Dr. Borja Erice (Mondragon Unibertsitatea , Spain)
Dr. Javier Gomez (ADVANCED MATERIAL SIMULATION , Spain) , Dr. Borja Erice (Mondragon Unibertsitatea , Spain)
1804 Computational Structural Stability
Main Organizer: Prof. Herbert Mang (Vienna University of Technology, Austria)
Main Organizer: Prof. Herbert Mang (Vienna University of Technology, Austria)
Chaired by:
Prof. Herbert Mang (Vienna University of Technology , Austria)
Prof. Herbert Mang (Vienna University of Technology , Austria)
Wednesday, 03 September, 2025
PL3 Plenary Lecture: Elías Cueto
Main Organizer: Prof. Elias Cueto (Universidad de Zaragoza, Spain)
Main Organizer: Prof. Elias Cueto (Universidad de Zaragoza, Spain)
Chaired by:
Prof. Nicolas MOËS (UC-Louvain , Belgium)
Prof. Nicolas MOËS (UC-Louvain , Belgium)
PL4 Plenary Lecture: WaiChing Sun
Main Organizer: Prof. WaiChing Sun (Columbia University, United States)
Main Organizer: Prof. WaiChing Sun (Columbia University, United States)
Chaired by:
Prof. Nicolas MOËS (UC-Louvain , Belgium)
Prof. Nicolas MOËS (UC-Louvain , Belgium)
303B Mechanical Properties and Plasticity of Small-scale Materials II
Main Organizer: Dr. Matteo Ghidelli (CNRS/LSPM, France) Co-Organizer: Hosni Idrissi (Université Catholique de Louvain, Belgium)
Main Organizer: Dr. Matteo Ghidelli (CNRS/LSPM, France) Co-Organizer: Hosni Idrissi (Université Catholique de Louvain, Belgium)
Chaired by:
Dr. Matteo Ghidelli (CNRS/LSPM , France)
Dr. Matteo Ghidelli (CNRS/LSPM , France)
A67B Design and Physics-Enforced Modeling of Materials with Machine Learning II
Main Organizer: Dr. Knut Andreas Meyer (Chalmers University of Technology, Sweden)
Main Organizer: Dr. Knut Andreas Meyer (Chalmers University of Technology, Sweden)
Chaired by:
Dr. Knut Andreas Meyer (Chalmers University of Technology , Sweden)
Dr. Knut Andreas Meyer (Chalmers University of Technology , Sweden)
1601 Phase-field Modeling and Engineering Applications in Solid Mechanics I
Main Organizer: Dr. Guillermo Lorenzo (University of A Coruña, Spain)
Main Organizer: Dr. Guillermo Lorenzo (University of A Coruña, Spain)
Chaired by:
Dr. Guillermo Lorenzo (University of A Coruña , Spain)
Dr. Guillermo Lorenzo (University of A Coruña , Spain)
1509B Multiscale Modelling and Characterisation ㏌ Structural Materials II
Main Organizer: Prof. Ikumu Watanabe (National Institute for Materials Science, Japan)
Main Organizer: Prof. Ikumu Watanabe (National Institute for Materials Science, Japan)
Chaired by:
Prof. Bjørn Holmedal (Norwegian University of Science and Technology , Norway) , Prof. Hector Basoalto (University of Sheffield , United Kingdom)
Prof. Bjørn Holmedal (Norwegian University of Science and Technology , Norway) , Prof. Hector Basoalto (University of Sheffield , United Kingdom)
1508A Multiscale Methods for Complex Microstructures I
Main Organizer: Prof. Johanna Waimann (Ruhr-University Bochum, Germany)
Main Organizer: Prof. Johanna Waimann (Ruhr-University Bochum, Germany)
Chaired by:
Dr. Tobias Kaiser (TU Dortmund University , Germany) , Prof. Johanna Waimann (Ruhr-University Bochum , Germany)
Dr. Tobias Kaiser (TU Dortmund University , Germany) , Prof. Johanna Waimann (Ruhr-University Bochum , Germany)
605A Non-linear scaling in material failure I
Main Organizer: Dr. Aurélien Doitrand (MATEIS, France)
Main Organizer: Dr. Aurélien Doitrand (MATEIS, France)
Chaired by:
Mr. Sylvain Patinet (ESPCI/CNRS , France) , Dr. Aurélien Doitrand (MATEIS , France)
Mr. Sylvain Patinet (ESPCI/CNRS , France) , Dr. Aurélien Doitrand (MATEIS , France)
601B Plastic Instabilities, Ductile Damage, and Fracture II
Main Organizer: Phd. Lars Edvard Blystad Dæhli (Norwegian University of Science and Technology, Norway)
Main Organizer: Phd. Lars Edvard Blystad Dæhli (Norwegian University of Science and Technology, Norway)
Chaired by:
Prof. Ahmed Benallal (ENS Paris Saclay/CNRS , France) , Dr. Jose Rodriguez-Martinez (University Carlos III of Madrid , Spain)
Prof. Ahmed Benallal (ENS Paris Saclay/CNRS , France) , Dr. Jose Rodriguez-Martinez (University Carlos III of Madrid , Spain)
204 Modeling Mechanical Behavior of Nano- and Micro Scale Materials
Main Organizer: Prof. Aylin Ahadi (Mechanical Engineering Sciences, Division of Mechanics, Sweden)
Main Organizer: Prof. Aylin Ahadi (Mechanical Engineering Sciences, Division of Mechanics, Sweden)
Chaired by:
Dr. Oguz Umut Salman (CNRS , France) , Prof. Aylin Ahadi (Mechanical Engineering Sciences, Division of Mechanics , Sweden)
Dr. Oguz Umut Salman (CNRS , France) , Prof. Aylin Ahadi (Mechanical Engineering Sciences, Division of Mechanics , Sweden)
205A Mechanics or Machine Learning Methods for Computational Material Design I
Main Organizer: Dr. Wei Tan (Queen Mary University of London, United Kingdom)
Main Organizer: Dr. Wei Tan (Queen Mary University of London, United Kingdom)
Chaired by:
Prof. Burigede Liu (University of Cambridge , United Kingdom) , Dr. Wei Tan (Queen Mary University of London , United Kingdom)
Prof. Burigede Liu (University of Cambridge , United Kingdom) , Dr. Wei Tan (Queen Mary University of London , United Kingdom)
608A Fracture, Damage and Failure Mechanics of Cementitious Materials I
Main Organizer: Dr. Rena C. Yu (Universidad de Castilla-La Mancha, Spain)
Main Organizer: Dr. Rena C. Yu (Universidad de Castilla-La Mancha, Spain)
Chaired by:
Dr. Rena C. Yu (Universidad de Castilla-La Mancha , Spain) , Prof. Yujie Huang (North University of China , China)
Dr. Rena C. Yu (Universidad de Castilla-La Mancha , Spain) , Prof. Yujie Huang (North University of China , China)
1701B Advanced Modeling and Numerical Methods for the Nonlinear Analysis of Beam and Shell Structures II
Main Organizer: Prof. Giovanni Garcea (University of Calabria, Italy)
Main Organizer: Prof. Giovanni Garcea (University of Calabria, Italy)
Chaired by:
Dr. Domenico Magisano (Università della Calabria , Italy) , Prof. Giovanni Garcea (University of Calabria , Italy)
Dr. Domenico Magisano (Università della Calabria , Italy) , Prof. Giovanni Garcea (University of Calabria , Italy)
706A Machine Learning Empowered Computational Plasticity, Fracture and Interdisciplinarity I
Main Organizer: Dr. Yinan Cui (Tsinghua University, China)
Main Organizer: Dr. Yinan Cui (Tsinghua University, China)
Chaired by:
Prof. Giacomo Po (University of Miami , United States) , Dr. Yinan Cui (Tsinghua University , China)
Prof. Giacomo Po (University of Miami , United States) , Dr. Yinan Cui (Tsinghua University , China)
1503A Multiscale And Multiphysics Modelling Of Fibrous Materials And Fibre Reinforced Composites I
Main Organizer: Dr. Emanuela Bosco (Eindhoven University of Technology, Netherlands)
Main Organizer: Dr. Emanuela Bosco (Eindhoven University of Technology, Netherlands)
Chaired by:
Prof. Artem Kulachenko (KTH Royal Institute of Technology , Sweden) , Dr. Emanuela Bosco (Eindhoven University of Technology , Netherlands)
Prof. Artem Kulachenko (KTH Royal Institute of Technology , Sweden) , Dr. Emanuela Bosco (Eindhoven University of Technology , Netherlands)
603A Metal Fatigue And Elastoplasticity: Modeling And Applications I
Main Organizer: Prof. Valentina Salomoni (University of Padova, Italy)
Main Organizer: Prof. Valentina Salomoni (University of Padova, Italy)
Chaired by:
Prof. Riccardo Fincato (Padova University , Italy) , Prof. Masayuki Arai (Tokyo University of Science , Japan)
Prof. Riccardo Fincato (Padova University , Italy) , Prof. Masayuki Arai (Tokyo University of Science , Japan)
PL5 Plenary Lecture: Laura de Lorenzis
Main Organizer: Prof. Laura De Lorenzis (ETH Zurich, Switzerland)
Main Organizer: Prof. Laura De Lorenzis (ETH Zurich, Switzerland)
Chaired by:
Prof. Elias Cueto (Universidad de Zaragoza , Spain)
Prof. Elias Cueto (Universidad de Zaragoza , Spain)
PL6 Plenary Lecture: Jean Philippe Ponthot
Main Organizer: Prof. Jean Philippe Ponthot (University of Liège, Belgium)
Main Organizer: Prof. Jean Philippe Ponthot (University of Liège, Belgium)
Chaired by:
Prof. Elias Cueto (Universidad de Zaragoza , Spain)
Prof. Elias Cueto (Universidad de Zaragoza , Spain)
A67C Design and Physics-Enforced Modeling of Materials with Machine Learning III
Main Organizer: Dr. Knut Andreas Meyer (Chalmers University of Technology, Sweden)
Main Organizer: Dr. Knut Andreas Meyer (Chalmers University of Technology, Sweden)
Chaired by:
Prof. Markus Kästner (TU Dresden , Germany)
Prof. Markus Kästner (TU Dresden , Germany)
1509C Multiscale Modelling and Characterisation ㏌ Structural Materials III
Main Organizer: Prof. Ikumu Watanabe (National Institute for Materials Science, Japan)
Main Organizer: Prof. Ikumu Watanabe (National Institute for Materials Science, Japan)
Chaired by:
Prof. Joao Quinta da Fonseca (University of Manchester , United Kingdom) , Dr. Kazuki Shibanuma (The University of Tokyo , Japan)
Prof. Joao Quinta da Fonseca (University of Manchester , United Kingdom) , Dr. Kazuki Shibanuma (The University of Tokyo , Japan)
1508B Multiscale Methods for Complex Microstructures II
Main Organizer: Prof. Johanna Waimann (Ruhr-University Bochum, Germany)
Main Organizer: Prof. Johanna Waimann (Ruhr-University Bochum, Germany)
Chaired by:
Prof. Johanna Waimann (Ruhr-University Bochum , Germany) , Dr. Sonja Hellebrand (University of Duisburg-Essen , Germany)
Prof. Johanna Waimann (Ruhr-University Bochum , Germany) , Dr. Sonja Hellebrand (University of Duisburg-Essen , Germany)
605B Non-linear scaling in material failure II
Main Organizer: Dr. Aurélien Doitrand (MATEIS, France)
Main Organizer: Dr. Aurélien Doitrand (MATEIS, France)
Chaired by:
Dr. Gergely Molnar (INSA de Lyon / CNRS , France) , Dr. Aurélien Doitrand (MATEIS , France)
Dr. Gergely Molnar (INSA de Lyon / CNRS , France) , Dr. Aurélien Doitrand (MATEIS , France)
601C Plastic Instabilities, Ductile Damage, and Fracture III
Main Organizer: Phd. Lars Edvard Blystad Dæhli (Norwegian University of Science and Technology, Norway)
Main Organizer: Phd. Lars Edvard Blystad Dæhli (Norwegian University of Science and Technology, Norway)
Chaired by:
Phd. Lars Edvard Blystad Dæhli (Norwegian University of Science and Technology , Norway) , Prof. Ahmed Benallal (ENS Paris Saclay/CNRS , France)
Phd. Lars Edvard Blystad Dæhli (Norwegian University of Science and Technology , Norway) , Prof. Ahmed Benallal (ENS Paris Saclay/CNRS , France)
201A Modeling and Computation of Inelasticity in Soft Materials I
Main Organizer: Dr. Ju Liu (Southern University of Science and Technology, China)
Main Organizer: Dr. Ju Liu (Southern University of Science and Technology, China)
Chaired by:
Mr. Chongran Zhao (Southern Univerisity of Science and Technology , China)
Mr. Chongran Zhao (Southern Univerisity of Science and Technology , China)
205B Mechanics or Machine Learning Methods for Computational Material Design II
Main Organizer: Dr. Wei Tan (Queen Mary University of London, United Kingdom)
Main Organizer: Dr. Wei Tan (Queen Mary University of London, United Kingdom)
Chaired by:
Dr. Wei Tan (Queen Mary University of London , United Kingdom) , Prof. Burigede Liu (University of Cambridge , United Kingdom)
Dr. Wei Tan (Queen Mary University of London , United Kingdom) , Prof. Burigede Liu (University of Cambridge , United Kingdom)
608B Fracture, Damage and Failure Mechanics of Cementitious Materials II
Main Organizer: Dr. Rena C. Yu (Universidad de Castilla-La Mancha, Spain)
Main Organizer: Dr. Rena C. Yu (Universidad de Castilla-La Mancha, Spain)
Chaired by:
Prof. Hui Zhang (North University of China , China) , Dr. Lu Hai (The Hong Kong Polytechnic University , China, Hong Kong)
Prof. Hui Zhang (North University of China , China) , Dr. Lu Hai (The Hong Kong Polytechnic University , China, Hong Kong)
706B Machine Learning Empowered Computational Plasticity, Fracture and Interdisciplinarity II
Main Organizer: Dr. Yinan Cui (Tsinghua University, China)
Main Organizer: Dr. Yinan Cui (Tsinghua University, China)
Chaired by:
Prof. Z.L. Liu (Tsinghua University , China) , Dr. Yun Tian (Peking University Third Hospital , China)
Prof. Z.L. Liu (Tsinghua University , China) , Dr. Yun Tian (Peking University Third Hospital , China)
501A Contact and Interface Mechanics I
Main Organizer: Prof. Michel Raous (Laboratoire de Mécanique et d'Acoustique - CNRS - France, France)
Main Organizer: Prof. Michel Raous (Laboratoire de Mécanique et d'Acoustique - CNRS - France, France)
Chaired by:
Prof. Michel Raous (Laboratoire de Mécanique et d'Acoustique - CNRS - France , France) , Prof. Peter Wriggers (Leibniz University of Hannover , Germany)
Prof. Michel Raous (Laboratoire de Mécanique et d'Acoustique - CNRS - France , France) , Prof. Peter Wriggers (Leibniz University of Hannover , Germany)
302A Plasticity and Damage at the Microscale: Modeling, Simulation, and Experimental Synergy I
Main Organizer: Dr. Karo Sedighiani (Tata Steel, Netherlands)
Main Organizer: Dr. Karo Sedighiani (Tata Steel, Netherlands)
Chaired by:
Dr. Karo Sedighiani (Tata Steel , Netherlands)
Dr. Karo Sedighiani (Tata Steel , Netherlands)
303C Mechanical Properties and Plasticity of Small-scale Materials III
Main Organizer: Dr. Matteo Ghidelli (CNRS/LSPM, France) Co-Organizer: Hosni Idrissi (Université Catholique de Louvain, Belgium)
Main Organizer: Dr. Matteo Ghidelli (CNRS/LSPM, France) Co-Organizer: Hosni Idrissi (Université Catholique de Louvain, Belgium)
Chaired by:
Dr. Matteo Ghidelli (CNRS/LSPM , France)
Dr. Matteo Ghidelli (CNRS/LSPM , France)
1503B Multiscale And Multiphysics Modelling Of Fibrous Materials And Fibre Reinforced Composites II
Main Organizer: Dr. Emanuela Bosco (Eindhoven University of Technology, Netherlands)
Main Organizer: Dr. Emanuela Bosco (Eindhoven University of Technology, Netherlands)
Chaired by:
Dr. Emanuela Bosco (Eindhoven University of Technology , Netherlands) , Prof. Artem Kulachenko (KTH Royal Institute of Technology , Sweden)
Dr. Emanuela Bosco (Eindhoven University of Technology , Netherlands) , Prof. Artem Kulachenko (KTH Royal Institute of Technology , Sweden)
603B Metal Fatigue And Elastoplasticity: Modeling And Applications II
Main Organizer: Prof. Valentina Salomoni (University of Padova, Italy)
Main Organizer: Prof. Valentina Salomoni (University of Padova, Italy)
Chaired by:
Prof. Cemal Basaran (University at Buffalo, The State University of New York , United States) , Prof. Yuichi Shintaku (University of Tsukuba , Japan)
Prof. Cemal Basaran (University at Buffalo, The State University of New York , United States) , Prof. Yuichi Shintaku (University of Tsukuba , Japan)
Thursday, 04 September, 2025
PL7 Plenary Lecture: Nicolas Moës
Main Organizer: Prof. Nicolas MOËS (UC-Louvain, Belgium)
Main Organizer: Prof. Nicolas MOËS (UC-Louvain, Belgium)
Chaired by:
Prof. Laura De Lorenzis (ETH Zurich , Switzerland)
Prof. Laura De Lorenzis (ETH Zurich , Switzerland)
PL8 Plenary Lecture: Anna Pandolfi
Main Organizer: Prof. Anna Pandolfi (Politecnico di Milano, Italy)
Main Organizer: Prof. Anna Pandolfi (Politecnico di Milano, Italy)
Chaired by:
Prof. Laura De Lorenzis (ETH Zurich , Switzerland)
Prof. Laura De Lorenzis (ETH Zurich , Switzerland)
1504A Computational micromechanics of plasticity and failure in multi-component functional materials I
Main Organizer: Prof. Katarzyna Kowalczyk-Gajewska (Institute of Fundamental Technological Research, Polish Academy of Sciences, Poland)
Main Organizer: Prof. Katarzyna Kowalczyk-Gajewska (Institute of Fundamental Technological Research, Polish Academy of Sciences, Poland)
Chaired by:
Prof. Katarzyna Kowalczyk-Gajewska (Institute of Fundamental Technological Research, Polish Academy of Sciences , Poland)
Prof. Katarzyna Kowalczyk-Gajewska (Institute of Fundamental Technological Research, Polish Academy of Sciences , Poland)
201B Modeling and Computation of Inelasticity in Soft Materials II
Main Organizer: Dr. Ju Liu (Southern University of Science and Technology, China)
Main Organizer: Dr. Ju Liu (Southern University of Science and Technology, China)
Chaired by:
Phd. Jiashen Guan (Southern University of Science and Technology , China)
Phd. Jiashen Guan (Southern University of Science and Technology , China)
501B Contact and Interface Mechanics II
Main Organizer: Prof. Michel Raous (Laboratoire de Mécanique et d'Acoustique - CNRS - France, France)
Main Organizer: Prof. Michel Raous (Laboratoire de Mécanique et d'Acoustique - CNRS - France, France)
Chaired by:
Prof. Peter Wriggers (Leibniz University of Hannover , Germany) , Prof. Michel Raous (Laboratoire de Mécanique et d'Acoustique - CNRS - France , France)
Prof. Peter Wriggers (Leibniz University of Hannover , Germany) , Prof. Michel Raous (Laboratoire de Mécanique et d'Acoustique - CNRS - France , France)
302B Plasticity and Damage at the Microscale: Modeling, Simulation, and Experimental Synergy II
Main Organizer: Dr. Karo Sedighiani (Tata Steel, Netherlands)
Main Organizer: Dr. Karo Sedighiani (Tata Steel, Netherlands)
Chaired by:
Prof. Martin Diehl (KU Leuven , Belgium)
Prof. Martin Diehl (KU Leuven , Belgium)
1501A Multi-scale and computational scale bridging I
Main Organizer: Prof. Kenjiro Terada (Tohoku University, Japan)
Main Organizer: Prof. Kenjiro Terada (Tohoku University, Japan)
Chaired by:
Prof. Caglar Oskay (Vanderbilt University , United States)
Prof. Caglar Oskay (Vanderbilt University , United States)
1502A Parameterization, Validation, and Uncertainty Quantification in Plasticity and Failure I
Main Organizer: Dr. Gustavo Castelluccio (Universidad de Cranfield, United Kingdom)
Main Organizer: Dr. Gustavo Castelluccio (Universidad de Cranfield, United Kingdom)
Chaired by:
Dr. Gustavo Castelluccio (Universidad de Cranfield , United Kingdom)
Dr. Gustavo Castelluccio (Universidad de Cranfield , United Kingdom)
606A Advanced Simulation in Damage, Fracture, Fatigue, Hydrogen Embrittlement and Phase-Field Modeling I
Main Organizer: Dr. Guoyu Lin (Synopsys, Inc., United States)
Main Organizer: Dr. Guoyu Lin (Synopsys, Inc., United States)
Chaired by:
Dr. Guoyu Lin (Synopsys, Inc. , United States) , Dr. Fabian Welschinger (Robert Bosch GmbH , Germany)
Dr. Guoyu Lin (Synopsys, Inc. , United States) , Dr. Fabian Welschinger (Robert Bosch GmbH , Germany)
1301A Mechanical Behavior of Metallic Materials in Manufacturing Processes I
Main Organizer: Prof. Lucival Malcher (University of Brasília, Brazil)
Main Organizer: Prof. Lucival Malcher (University of Brasília, Brazil)
Chaired by:
Prof. Lucival Malcher (University of Brasília , Brazil) , Dr. Tiago Silva (INEGI , Portugal)
Prof. Lucival Malcher (University of Brasília , Brazil) , Dr. Tiago Silva (INEGI , Portugal)
202A Fundamentals of Defect-driven Inelasticity of Solids and Liquid Crystals I
Main Organizer: Prof. Amit Acharya (Carnegie Mellon University, United States) Co-Organizer: Jorge Viñals (University of Minnesota, United States)
Main Organizer: Prof. Amit Acharya (Carnegie Mellon University, United States) Co-Organizer: Jorge Viñals (University of Minnesota, United States)
Chaired by:
Prof. Amit Acharya (Carnegie Mellon University , United States)
Prof. Amit Acharya (Carnegie Mellon University , United States)
1201A Detection, Localization, and Characterization of Damage I
Main Organizer: Prof. Kathrin Welker (Helmut-Schmidt-University / University of the Federal Armed Forces Hamburg, Germany)
Main Organizer: Prof. Kathrin Welker (Helmut-Schmidt-University / University of the Federal Armed Forces Hamburg, Germany)
Chaired by:
Mr. Chaitanya Kandekar (Helmut-Schmidt University/ , Germany) , Prof. Kathrin Welker (Helmut-Schmidt-University / University of the Federal Armed Forces Hamburg , Germany)
Mr. Chaitanya Kandekar (Helmut-Schmidt University/ , Germany) , Prof. Kathrin Welker (Helmut-Schmidt-University / University of the Federal Armed Forces Hamburg , Germany)
801A Machine Learning for Computational Mechanics: Innovations and Applications I
Main Organizer: Dr. Remi Dingreville (Sandia National Laboratories, United States)
Main Organizer: Dr. Remi Dingreville (Sandia National Laboratories, United States)
Chaired by:
Dr. Remi Dingreville (Sandia National Laboratories , United States)
Dr. Remi Dingreville (Sandia National Laboratories , United States)
304A Nanoscale Origins of Plasticity in Modern Nanostructured Materials: a COST MecaNano Minisymposia I
Main Organizer: Dr. Julien Guénolé (CNRS, France)
Main Organizer: Dr. Julien Guénolé (CNRS, France)
Chaired by:
Dr. Julien Guénolé (CNRS , France)
Dr. Julien Guénolé (CNRS , France)
303D Mechanical Properties and Plasticity of Small-scale Materials IV
Main Organizer: Dr. Matteo Ghidelli (CNRS/LSPM, France) Co-Organizer: Hosni Idrissi (Université Catholique de Louvain, Belgium)
Main Organizer: Dr. Matteo Ghidelli (CNRS/LSPM, France) Co-Organizer: Hosni Idrissi (Université Catholique de Louvain, Belgium)
Chaired by:
Dr. Matteo Ghidelli (CNRS/LSPM , France)
Dr. Matteo Ghidelli (CNRS/LSPM , France)
601D Plastic Instabilities, Ductile Damage, and Fracture IV
Main Organizer: Phd. Lars Edvard Blystad Dæhli (Norwegian University of Science and Technology, Norway)
Main Organizer: Phd. Lars Edvard Blystad Dæhli (Norwegian University of Science and Technology, Norway)
Chaired by:
Dr. Borja Erice (Mondragon Unibertsitatea , Spain) , Phd. Lars Edvard Blystad Dæhli (Norwegian University of Science and Technology , Norway)
Dr. Borja Erice (Mondragon Unibertsitatea , Spain) , Phd. Lars Edvard Blystad Dæhli (Norwegian University of Science and Technology , Norway)
PL9 Plenary Lecture: Samuel Forest
Main Organizer: Prof. Samuel Forest (Armines Mines ParisTech, France)
Main Organizer: Prof. Samuel Forest (Armines Mines ParisTech, France)
Chaired by:
Prof. Peter Wriggers (Leibniz University of Hannover , Germany)
Prof. Peter Wriggers (Leibniz University of Hannover , Germany)
PL10 Plenary Lecture: Alessandro Reali
Main Organizer: Prof. Alessandro Reali (University of Pavia, Italy)
Main Organizer: Prof. Alessandro Reali (University of Pavia, Italy)
Chaired by:
Prof. Peter Wriggers (Leibniz University of Hannover , Germany)
Prof. Peter Wriggers (Leibniz University of Hannover , Germany)
1704 Phase-Field Approaches to Plasticity and Inelasticity
Main Organizer: Dr. Andreas Prahs (Karlsruhe Institute of Technology (KIT), Germany)
Main Organizer: Dr. Andreas Prahs (Karlsruhe Institute of Technology (KIT), Germany)
Chaired by:
Dr. Andreas Prahs (Karlsruhe Institute of Technology (KIT) , Germany) , Dr. Daniel Schneider (Karlsruhe Institute of Technology (KIT) , Germany)
Dr. Andreas Prahs (Karlsruhe Institute of Technology (KIT) , Germany) , Dr. Daniel Schneider (Karlsruhe Institute of Technology (KIT) , Germany)
1504B Computational micromechanics of plasticity and failure in multi-component functional materials II
Main Organizer: Prof. Katarzyna Kowalczyk-Gajewska (Institute of Fundamental Technological Research, Polish Academy of Sciences, Poland)
Main Organizer: Prof. Katarzyna Kowalczyk-Gajewska (Institute of Fundamental Technological Research, Polish Academy of Sciences, Poland)
Chaired by:
Prof. Katarzyna Kowalczyk-Gajewska (Institute of Fundamental Technological Research, Polish Academy of Sciences , Poland)
Prof. Katarzyna Kowalczyk-Gajewska (Institute of Fundamental Technological Research, Polish Academy of Sciences , Poland)
302C Plasticity and Damage at the Microscale: Modeling, Simulation, and Experimental Synergy III
Main Organizer: Dr. Karo Sedighiani (Tata Steel, Netherlands)
Main Organizer: Dr. Karo Sedighiani (Tata Steel, Netherlands)
Chaired by:
Prof. Manas Upadhyay (Ecole Polytechnique , France)
Prof. Manas Upadhyay (Ecole Polytechnique , France)
1501B Multi-scale and computational scale bridging II
Main Organizer: Prof. Kenjiro Terada (Tohoku University, Japan)
Main Organizer: Prof. Kenjiro Terada (Tohoku University, Japan)
Chaired by:
Prof. Eduard Rohan (University of West Bohemia , Czechia)
Prof. Eduard Rohan (University of West Bohemia , Czechia)
1502B Parameterization, Validation, and Uncertainty Quantification in Plasticity and Failure II
Main Organizer: Dr. Gustavo Castelluccio (Universidad de Cranfield, United Kingdom)
Main Organizer: Dr. Gustavo Castelluccio (Universidad de Cranfield, United Kingdom)
Chaired by:
Dr. Gustavo Castelluccio (Universidad de Cranfield , United Kingdom)
Dr. Gustavo Castelluccio (Universidad de Cranfield , United Kingdom)
1603 Advanced Multi-functional Materials: Tackling Multi-scale and Multi-field Challenges I
Main Organizer: Prof. Michele Marino (University of Rome Tor Vergata, Italy)
Main Organizer: Prof. Michele Marino (University of Rome Tor Vergata, Italy)
Chaired by:
Prof. Michele Marino (University of Rome Tor Vergata , Italy) , Prof. Daniel Garcia-Gonzalez (Universidad Carlos III de Madrid , Spain)
Prof. Michele Marino (University of Rome Tor Vergata , Italy) , Prof. Daniel Garcia-Gonzalez (Universidad Carlos III de Madrid , Spain)
606B Advanced Simulation in Damage, Fracture, Fatigue, Hydrogen Embrittlement and Phase-Field Modeling II
Main Organizer: Dr. Guoyu Lin (Synopsys, Inc., United States)
Main Organizer: Dr. Guoyu Lin (Synopsys, Inc., United States)
Chaired by:
Dr. Fabian Welschinger (Robert Bosch GmbH , Germany) , Dr. Guoyu Lin (Synopsys, Inc. , United States)
Dr. Fabian Welschinger (Robert Bosch GmbH , Germany) , Dr. Guoyu Lin (Synopsys, Inc. , United States)
1301B Mechanical Behavior of Metallic Materials in Manufacturing Processes II
Main Organizer: Prof. Lucival Malcher (University of Brasília, Brazil)
Main Organizer: Prof. Lucival Malcher (University of Brasília, Brazil)
Chaired by:
Prof. Lucival Malcher (University of Brasília , Brazil) , Dr. Tiago Silva (INEGI , Portugal)
Prof. Lucival Malcher (University of Brasília , Brazil) , Dr. Tiago Silva (INEGI , Portugal)
202B Fundamentals of Defect-driven Inelasticity of Solids and Liquid Crystals II
Main Organizer: Prof. Amit Acharya (Carnegie Mellon University, United States) Co-Organizer: Jorge Viñals (University of Minnesota, United States)
Main Organizer: Prof. Amit Acharya (Carnegie Mellon University, United States) Co-Organizer: Jorge Viñals (University of Minnesota, United States)
Chaired by:
Prof. Jorge Vinals (University of Minnesota , United States)
Prof. Jorge Vinals (University of Minnesota , United States)
701A Machine Learning Methods for Inelastic/Multiscale/Multiphysics Material Modeling I
Main Organizer: Prof. Fadi Aldakheel (Leibniz Universität Hannover, Germany)
Main Organizer: Prof. Fadi Aldakheel (Leibniz Universität Hannover, Germany)
Chaired by:
Prof. WaiChing Sun (Columbia University , United States) , Prof. Oliver Weeger (TU Darmstadt , Germany)
Prof. WaiChing Sun (Columbia University , United States) , Prof. Oliver Weeger (TU Darmstadt , Germany)
801B Machine Learning for Computational Mechanics: Innovations and Applications II
Main Organizer: Dr. Remi Dingreville (Sandia National Laboratories, United States)
Main Organizer: Dr. Remi Dingreville (Sandia National Laboratories, United States)
Chaired by:
Dr. Remi Dingreville (Sandia National Laboratories , United States)
Dr. Remi Dingreville (Sandia National Laboratories , United States)
304B Nanoscale Origins of Plasticity in Modern Nanostructured Materials: a COST MecaNano Minisymposia II
Main Organizer: Dr. Julien Guénolé (CNRS, France)
Main Organizer: Dr. Julien Guénolé (CNRS, France)
Chaired by:
Prof. Dan Mordehai (Technion - Israel Institute of Technology , Israel)
Prof. Dan Mordehai (Technion - Israel Institute of Technology , Israel)
1001A Computational Geomechanics I
Main Organizer: Prof. Jinhyun Choo (Seoul National University, Republic of Korea)
Main Organizer: Prof. Jinhyun Choo (Seoul National University, Republic of Korea)
Chaired by:
Prof. Jinhyun Choo (Seoul National University , Republic of Korea) , Prof. Claudio Tamagnini (University of Perugia , Italy)
Prof. Jinhyun Choo (Seoul National University , Republic of Korea) , Prof. Claudio Tamagnini (University of Perugia , Italy)
1201B Detection, Localization, and Characterization of Damage II
Main Organizer: Prof. Kathrin Welker (Helmut-Schmidt-University / University of the Federal Armed Forces Hamburg, Germany)
Main Organizer: Prof. Kathrin Welker (Helmut-Schmidt-University / University of the Federal Armed Forces Hamburg, Germany)
Chaired by:
Mr. Tim Suchan (Helmut Schmidt University / University of the Federal Armed Forces Hamburg , Germany) , Prof. Kathrin Welker (Helmut-Schmidt-University / University of the Federal Armed Forces Hamburg , Germany)
Mr. Tim Suchan (Helmut Schmidt University / University of the Federal Armed Forces Hamburg , Germany) , Prof. Kathrin Welker (Helmut-Schmidt-University / University of the Federal Armed Forces Hamburg , Germany)
Friday, 05 September, 2025
PL11 Plenary Lecture: Kenjiro Terada
Main Organizer: Prof. Kenjiro Terada (Tohoku University, Japan)
Main Organizer: Prof. Kenjiro Terada (Tohoku University, Japan)
Chaired by:
Prof. WaiChing Sun (Columbia University , United States)
Prof. WaiChing Sun (Columbia University , United States)
PL12 Plenary Lecture: Zhuo Zhuang
Main Organizer: Prof. Zhuo Zhuang (Tsinghua University, China)
Main Organizer: Prof. Zhuo Zhuang (Tsinghua University, China)
Chaired by:
Prof. WaiChing Sun (Columbia University , United States)
Prof. WaiChing Sun (Columbia University , United States)
302D Plasticity and Damage at the Microscale: Modeling, Simulation, and Experimental Synergy IV
Main Organizer: Dr. Karo Sedighiani (Tata Steel, Netherlands)
Main Organizer: Dr. Karo Sedighiani (Tata Steel, Netherlands)
Chaired by:
Dr. Karo Sedighiani (Tata Steel , Netherlands)
Dr. Karo Sedighiani (Tata Steel , Netherlands)
1202 Inverse Problems: Theoretical Challenges, Numerical Solutions, and Cutting-Edge Applications in Biomedicine and Material Engineering
Main Organizer: Dr. Abramo Agosti (University of Pavia, Italy)
Main Organizer: Dr. Abramo Agosti (University of Pavia, Italy)
Chaired by:
Dr. Abramo Agosti (University of Pavia , Italy)
Dr. Abramo Agosti (University of Pavia , Italy)
701B Machine Learning Methods for Inelastic/Multiscale/Multiphysics Material Modeling II
Main Organizer: Prof. Fadi Aldakheel (Leibniz Universität Hannover, Germany)
Main Organizer: Prof. Fadi Aldakheel (Leibniz Universität Hannover, Germany)
Chaired by:
Prof. Fadi Aldakheel (Leibniz Universität Hannover , Germany) , Prof. Dennis Kochmann (ETH Zurich , Switzerland)
Prof. Fadi Aldakheel (Leibniz Universität Hannover , Germany) , Prof. Dennis Kochmann (ETH Zurich , Switzerland)
801C Machine Learning for Computational Mechanics: Innovations and Applications III
Main Organizer: Dr. Remi Dingreville (Sandia National Laboratories, United States)
Main Organizer: Dr. Remi Dingreville (Sandia National Laboratories, United States)
Chaired by:
Dr. Remi Dingreville (Sandia National Laboratories , United States)
Dr. Remi Dingreville (Sandia National Laboratories , United States)
604 Phase Field Modelling of Failure Phenomena in Solid Mechanics
Main Organizer: Dr. Aris Tsakmakis (Technische Universität Darmstadt, Germany)
Main Organizer: Dr. Aris Tsakmakis (Technische Universität Darmstadt, Germany)
Chaired by:
Dr. Aris Tsakmakis (Technische Universität Darmstadt , Germany) , Prof. Christian Linder (Stanford University , United States)
Dr. Aris Tsakmakis (Technische Universität Darmstadt , Germany) , Prof. Christian Linder (Stanford University , United States)
1705 Quantum Computing in Mechanics
Main Organizer: Prof. Anna Pandolfi (Politecnico di Milano, Italy)
Main Organizer: Prof. Anna Pandolfi (Politecnico di Milano, Italy)
Chaired by:
Prof. Anna Pandolfi (Politecnico di Milano , Italy) , Prof. Ludovic Noels (University of Liege , Belgium)
Prof. Anna Pandolfi (Politecnico di Milano , Italy) , Prof. Ludovic Noels (University of Liege , Belgium)
1702 Virtual Element Method for Engineering Applications
Main Organizer: Prof. Peter Wriggers (Leibniz University of Hannover, Germany)
Main Organizer: Prof. Peter Wriggers (Leibniz University of Hannover, Germany)
Chaired by:
Prof. Peter Wriggers (Leibniz University of Hannover , Germany)
Prof. Peter Wriggers (Leibniz University of Hannover , Germany)
206 Elastoplasticity and Viscoplasticity
Main Organizer: Prof. Yuki Yamakawa (Tohoku University, Japan)
Main Organizer: Prof. Yuki Yamakawa (Tohoku University, Japan)
Chaired by:
Prof. Yuki Yamakawa (Tohoku University , Japan) , Prof. Koichi Hashiguchi (MSC Software, Ltd. , Japan)
Prof. Yuki Yamakawa (Tohoku University , Japan) , Prof. Koichi Hashiguchi (MSC Software, Ltd. , Japan)
704 Data-Driven Methods and Machine Learning for Particulate Materials
Main Organizer: Prof. Jacinto Ulloa (University of Michigan, United States)
Main Organizer: Prof. Jacinto Ulloa (University of Michigan, United States)
Chaired by:
Prof. Jacinto Ulloa (University of Michigan , United States) , Prof. Kostas Karapiperis (EPFL , Switzerland)
Prof. Jacinto Ulloa (University of Michigan , United States) , Prof. Kostas Karapiperis (EPFL , Switzerland)
1001B Computational Geomechanics II
Main Organizer: Prof. Jinhyun Choo (Seoul National University, Republic of Korea)
Main Organizer: Prof. Jinhyun Choo (Seoul National University, Republic of Korea)
Chaired by:
Prof. WaiChing Sun (Columbia University , United States) , Prof. Jinhyun Choo (Seoul National University , Republic of Korea)
Prof. WaiChing Sun (Columbia University , United States) , Prof. Jinhyun Choo (Seoul National University , Republic of Korea)
1501C Multi-scale and computational scale bridging III
Main Organizer: Prof. Kenjiro Terada (Tohoku University, Japan)
Main Organizer: Prof. Kenjiro Terada (Tohoku University, Japan)
Chaired by:
Prof. Frederic Legoll (ENPC , France)
Prof. Frederic Legoll (ENPC , France)
PL13 Plenary Lecture: Peter Wriggers
Main Organizer: Prof. Peter Wriggers (Leibniz University of Hannover, Germany)
Main Organizer: Prof. Peter Wriggers (Leibniz University of Hannover, Germany)
Chaired by:
Prof. Eduardo de Souza Neto ( Eduardo de Souza Neto, Swansea University, United Kingdom , United Kingdom)
Prof. Eduardo de Souza Neto ( Eduardo de Souza Neto, Swansea University, United Kingdom , United Kingdom)
PL14 Plenary Lecture: Dennis Kochmann
Main Organizer: Prof. Dennis Kochmann (ETH Zurich, Switzerland)
Main Organizer: Prof. Dennis Kochmann (ETH Zurich, Switzerland)
Chaired by:
Prof. Eduardo de Souza Neto ( Eduardo de Souza Neto, Swansea University, United Kingdom , United Kingdom)
Prof. Eduardo de Souza Neto ( Eduardo de Souza Neto, Swansea University, United Kingdom , United Kingdom)
International Centre for Numerical Methods in Engineering Barcelona, Spain
complas_sec@cimne.upc.edu/ Telf. + 34 - 93 405 46 94
Copyright © 2024 CIMNE, All Rights Reserved. Terms of service
complas_sec@cimne.upc.edu/ Telf. + 34 - 93 405 46 94
Copyright © 2024 CIMNE, All Rights Reserved. Terms of service