Programme
Tue, 02/09/2025
09:00 - 13:30
Reg.1
09:00 - 13:30
Reg.1
Main Organizer:
Prof.
Rainald Löhner
(George Mason University, United States)
Chaired by:
Prof. Djordje Peric
(Swansea University, United Kingdom, United Kingdom)
Main Organizer:
Mr.
Sjoerd Van der Veen
(Airbus Opérations SAS, France)
Chaired by:
Prof. Djordje Peric
(Swansea University, United Kingdom, United Kingdom)
Main Organizer:
Dr.
Matteo Ghidelli
(CNRS/LSPM, France)
Co-Organizer: Hosni Idrissi (Université Catholique de Louvain, Belgium)
Chaired by:
Dr. Matteo Ghidelli
(CNRS/LSPM, France)
-
Keynote
Deformation Mechanism of Talc: Insights from Nanomechanical Testing and Numerical Modelling
P. Cordier * -
Advanced thin film high entropy alloys with tunable mechanical properties
D. Vacirca * , F. Bignoli , A. Li Bassi , J. Best , P. Djemia , G. Dehm , M. Ghidelli -
Lab-on-a-Chip Nanomechanical Study of Annealing and Stress-Induced Grain Growth Effects on Plasticity and Time-Dependent Deformation in Sputtered Pt Thin Films.
R. Neshani * , M. Coulombier , A. Depoorter , M. Filez , C. Detavernier , H. Idrissi -
Correlative in situ micropillar compression for understanding anisotropic hardening in ferrite
A. Medina * , D. Bandla , R. Pippan , S. Lee , C. Kirchlechner -
Lüders Deformation Mediated TRIP-Effect in Metastable Nanocrystalline Steel
Y. Ivanisenko * , Y. Lu , G. Zhu , H. Hahn
Main Organizer:
Dr.
Knut Andreas Meyer
(Chalmers University of Technology, Sweden)
Chaired by:
Dr. Knut Andreas Meyer
(Chalmers University of Technology, Sweden)
-
Mechanics-Informed Machine Learning for Viscoelastic Constitutive Modeling of Concrete Creep
A. Delpasand * , R. Chudoba -
Predicting Temperature and Strain-Rate Effects in Recycled Polymer Blends Using an Efficient Hybrid FEM-NN Constitutive Model
N. Tang * , P. Hao , F. Gilabert -
A Deep Rheological Element for Modeling Large-Strain Viscoelasticity in Elastomers
F. Califano * , J. Ciambella -
Constitutive Kolmogorov–Arnold Networks (CKANs): Combining Accuracy and Interpretability in Data-Driven Material Modeling
K. Abdolazizi * , C. Cyron , K. Linka -
Reduction of State Variables by Physics-Enforced Neural Networks
K. Meyer * , C. Domann
Main Organizer:
Prof.
Ikumu Watanabe
(National Institute for Materials Science, Japan)
Chaired by:
Prof. Ikumu Watanabe
(National Institute for Materials Science, Japan)
,
Dr. Keita Kambayashi
(Nagaoka University of Technology, Japan)
-
Keynote
Ductile Fracture Finite element analysis of periodic microstructure using potential-based elastoplastic-damage constitutive model
I. Watanabe * , T. Tan -
Multiscale modeling of solute-dependent cross-slip for aluminum alloys
S. Yoon * , M. Rufinno , F. Roters -
A Eulerian Formulation of Phenomenological Poly-Crystal Plasticity for High Strain Rate and Large Deformation Applications
T. Flint * , J. Quinta da Fonseca , P. Shanthraj , P. Cardiff -
A Reproducible Crystal Plasticity Based Workflow for the Accurate Prediction of Aluminium Sheet Anisotropy
G. Bowker * , J. Quinta da Fonseca -
Flexible and Efficient Calibrations of Neural Network-Based Yield Surfaces to Crystal Plasticity Data
T. Mánik * , B. Holmedal
Main Organizer:
Prof.
Savvas Triantafyllou
(NTUA, Greece)
Chaired by:
Prof. Savvas Triantafyllou
(NTUA, Greece)
-
Fatigue Modelling of WAAM Ti-6Al-4V Using Crystal Plasticity Finite Element and Phase Field Methods
E. Kakouris * , F. Azhari , B. Zyto , P. Brommer , M. Preuss , M. Preuss -
An Adaptive Scaled Boundary Finite Element Method for Cohesive Phase Field Fracture in composite materials
I. Chrysikou * , S. Triantafyllou , H. Chen , C. Song -
Investigation of the Effect of Gaps and Overlaps on the Mechanical Performance of Variable Stiffness Composites: A Comparative Modeling Approach
G. Demirer * , A. Kayran -
An improved Material Point Method for Phase-Field Ductile Fracture Modeling
B. Zyto * , E. Kakouris -
Phase-Field Modeling of Anisotropic Crack Propagation Using Physics-Informed Deep Learning
N. Plungė * , P. Brommer , R. Edwards , E. Kakouris -
Non-intrusive linear stochastic crack propagation using SBFEM for the uncertainty quantification of crack paths
G. C. LITAINAS * , S. P. TRIANTAFYLLOU , A. G. EGGER , E. N. CHATZI , C. SONG
Main Organizer:
Dr.
Huseyin AYDIN
(The Scientific and Technological Research Council of Türkiye (TUBITAK), Turkey)
Chaired by:
Dr. Huseyin AYDIN
(The Scientific and Technological Research Council of Türkiye (TUBITAK), Turkey)
,
Dr. Andreas Lundbäck
(Luleå University of Technology, Sweden)
,
Phd. Sergio Jiménez
(CIMNE, Spain)
-
Modelling of Additive Manufacturing with the Finite Element Method; Residual Stresses
A. Lundbäck * , C. Andersson , S. Larsson -
Fatigue Life Prediction of High-Strength Steels Affected by Manufacturing Induced Roughness and Residual Stresses
L. Gonçalves , S. Jiménez , A. Cornejo , L. Barbu * -
Unified Plastic-Damage-Fatigue Methodology. Manufacturing Effects on Fatigue Performance of Metals
S. Jiménez * , L. Barbu , A. Cornejo -
Microstructure-Driven Fatigue Life Assessment of LPBF Inconel 718
A. Sahin Kahraman , B. Horasan , M. Akdemir , F. Guler , D. Aydin , H. Aydin * -
Numerical Modeling of Cyclic Softening and Hardening Under Fatigue Loading
R. Fincato * , S. Tsutsumi , T. Yonezawa , V. Salomoni -
Multiphysics Simulation of Additive Manufacturing-Induced Fracture Mechanics using Peridynamic Theory
J. Hesse * , C. Willberg , F. Winkelmann , R. Hein
Main Organizer:
Prof.
Antonio Gil
(Swansea University, United Kingdom)
Chaired by:
Prof. Javier Bonet
(CIMNE, Spain)
-
A Multi-Physics Model of Grain Microstructure Evolution with Dislocation Induced Spontaneous Grain Nucleation
I. Tandogan * , M. Budnitzki , S. Sandfeld -
Coupled Hydrolytic Degradation and Viscoplasticity in Amorphous Polymers
Z. Pan , H. Chen , L. Brassart * -
Multifield finite strain thermoplasticity: Theory and numerics
A. McBride * , R. Williams , Ł. Kaczmarczyk , P. Steinmann , C. Pretty , C. Pearce -
Multifield Thermoplasticity and its Application to Linear Friction Welding
R. Williams * , A. Shvarts , C. Pretty , A. McBride , Ł. Kaczmarczyk -
Thermal Stress in Finite Displacement and Axisymmetric Problem
C. Natsumeda * , K. Matsui , T. Yamada -
Multiphysics Discrete-Element Modelling of Electric-Current-Assisted Sintering
J. Rojek * , F. Nisar , S. Nosewicz , M. Chmielewski , K. Kaszyca -
A Maximum-Entropy Meshless Approach to Multiphysics Modeling of Hydrogels
R. Castillo-Acuna * , D. Kochmann
Main Organizer:
Phd.
Lars Edvard Blystad Dæhli
(Norwegian University of Science and Technology, Norway)
Chaired by:
Dr. Jose Rodriguez-Martinez
(University Carlos III of Madrid, Spain)
,
Dr. Borja Erice
(Mondragon Unibertsitatea, Spain)
-
Keynote
Simulation of pipe failure using a nonlocal GTN model
J. Besson * , E. Catel , A. Dahl , E. Lorentz -
An Implicit Non-local Two Length Scale GTN Model for Ductile Fracture Prediction at Low Triaxialities
S. Rajeev * , J. Faleskog , S. Wang , D. Morin -
Ductile Fracture Behavior of Hot-Rolled S355 Steel under Low Stress Triaxialities: Experimental and Numerical Investigation
D. Obkircher * , M. Costas , D. Morin , A. Clausen -
On the Bendability of Anisotropic Aluminium Alloys: A Numerical Study
D. Eckhoff * , O. Hopperstad , T. Børvik , L. Dæhli
Main Organizer:
Prof.
Stephane Commend
(HES-SO, University of Applied Sciences Western Switzerland, Fribourg, Switzerland)
Chaired by:
Prof. Stephane Commend
(HES-SO, University of Applied Sciences Western Switzerland, Fribourg, Switzerland)
-
Influence of Reduced Random Vectors on Failure Probabilities : A Benchmark Study Applied to Structural and Geotechnical Systems
J. Minini * , M. Wasem , S. Commend -
Probabilistic Settlement Analysis of Neighbouring Foundation Footing Embedded in Rotated Spatially Variable Anisotropic Random Fields
Y. BORU * , J. PIECZYŃSKA-KOZŁOWSKA , W. PUŁA -
Stochastic Modeling of Plane Strain Compression Tests With Micropolar Hypoplasticity Based on Screened Poisson Averaging of μCT Data
P. Hofer * , M. Schreter-Fleischhacker , M. Neuner , K. Basche , B. Schneider-Muntau , G. Medicus -
Using Reliability-Based Design Instead of a Deterministic Approach: Illustration of the Potential Economic Gain on a Simple Footing Bearing Capacity Example, Treated with Analytical and Numerical Methods
S. Commend * , J. Minini , D. Kohler , V. Labiouse
Main Organizer:
Prof.
Giovanni Garcea
(University of Calabria, Italy)
Chaired by:
Prof. Giovanni Garcea
(University of Calabria, Italy)
,
Dr. Domenico Magisano
(Università della Calabria, Italy)
-
Numerical Modelling of the Behaviour of Concrete-Filled Steel Tubular Columns in Fire
P. Dias Simão * , S. Oberhauser Braga , J. C. Rodrigues -
Path-following Analysis of Growth-driven Deformations in Thin Biological Tissues at Large Strains
D. Magisano * , A. Corrado , L. Leonetti , G. Garcea -
A virtual element formulation for geometrically exact 3D beams in large-rotation regimes
P. Gaziano * , M. Marino , G. Vairo , P. Wriggers -
Hybrid virtual elements for limit and shakedown analyses
G. Garcea * , A. Madeo , S. Marfia , E. Sacco , F. Liguori -
An Efficient Numerical Framework for the Nonlinear Analysis of Masonry Structures
G. Bertani * , A. Bilotta , A. D'Altri , S. de Miranda , F. Liguori , A. Madeo -
Fibers Remodeling in 3D Reinforced Soft Beam and Shell Models
M. Vasta * , G. Garcea , L. Leonetti , D. Magisano , C. Falcinelli , M. De Bellis , F. Recrosi , F. Luppino
Main Organizer:
Dr.
Takahiro Makiyama
(Institute of Technologists, Japan)
Chaired by:
Dr. Takahiro Makiyama
(Institute of Technologists, Japan)
,
Dr. Shohei Kajikawa
(The University of Electro-Communications, Japan)
-
Prediction of Mechanical Properties of Wood Cell Wall by Compression Test of Compressed Wood for Finite Element Analysis
S. Kajikawa * , K. Oda , T. Kuboki , M. Kondo , M. Abe , M. Seki , T. Miki -
Prediction of crack initiation in blanking based on tensile test results using notched specimens
R. YOSHIOKA * , S. FUMA , M. SASADA , T. TANAKA -
Finite Element Analysis for Forming In-plane Bent Parts Using Bending and Compression Processes
T. Muraoka * , Y. Okude , T. Katagiri , S. Kajikawa , T. Kuboki -
The effect of deposition strategies on thermal hystory in directed energy deposition
G. Piscopo * , M. Poggi , E. Atzeni , L. Iuliano , A. Salmi -
Effects of Height Reduction Ratio of Multi-Pass on Forged Shape in Mandrel-Less Incremental Forging of Circular Tube End without Axial Feed
T. Makiyama * -
Residual stress evaluation for laser metal deposition by sachs method
T. Izumi * , H. Sato , H. Aoki , M. Arai , Y. Meng
Main Organizer:
Dr.
Sasa Kovacevic
(University of Oxford, United Kingdom)
Chaired by:
Dr. Sasa Kovacevic
(University of Oxford, United Kingdom)
,
Dr. Daniel Höche
(Helmholtz-Zentrum hereon, Germany)
-
A Mulit-Phase-Field Modelling Framework for High-Cycle Corrosion Fatigue
K. Auth * , E. Martínez-Pañeda , C. Niordson -
Coupling diffusion-mechanical problem through discontinuous and continuous damage approaches
A. Socié * , L. Salmon , S. Lejeunes , M. Garajeu , T. Helfer , V. Blanc -
Modelling Hydrogen Embrittlement Acoustic Emission in High Strengh Steels
E. Gazenbiller * , A. Ravikumar , D. Höche , M. L. Zheludkevich -
Finite Element Buildability Analysis of 3D Printed Concrete Structures
Q. Chen * , G. Barbat , M. Cervera -
Adaptive Formulation Refinement Strategy for the Mesh Objective Evaluation of Quasi-Brittle Failure
G. Barbat * , M. Cervera , H. Venghaus , M. Chiumenti -
Recent Advances in Phase-field Modeling of Corrosion Damage and Stress Corrosion Cracking
S. Kovacevic * , E. Martinez-Paneda
Main Organizer:
Prof.
Li-Wei Liu
(National Taiwan University, Taiwan)
Chaired by:
Prof. Li-Wei Liu
(National Taiwan University, Taiwan)
-
Keynote
Emergent Distortion in a Smooth Multisurface Model
R. Marek * , S. Parma -
Initial and subsequent yield surfaces of cellular composites
G. Yu , C. Chuang * , L. Liu , C. Huang -
Simulation of High-Pressure-Torsion within the Material-Point-Method
D. Cloidt * , M. Koßler , R. Niekamp , J. Schröder -
Cyclic behavior of an elastoplastic model with cubic distortional yield surface
L. Liu * , G. Yu , C. Chuang
Main Organizer:
Dr.
Javier Gomez
(ADVANCED MATERIAL SIMULATION, Spain)
Chaired by:
Dr. Javier Gomez
(ADVANCED MATERIAL SIMULATION, Spain)
,
Dr. Borja Erice
(Mondragon Unibertsitatea, Spain)
-
Dimat Multiscale Simulation Toolkits For Industrial Modelling
J. Oroya * , J. Gomez -
Physics-informed data-driven modeling for complex glass forming processes
K. Chang * -
Multiscale Modeling of Textile Yarns and Nets via Particle-based Equilibrium and Finite Element Analysis
J. Gomez * , J. Oroya -
Machine Learning and Sensitivity Analysis-Driven Optimization for Defect Control in Deep Drawing
L. Muñiz * , J. Trinidad , L. Galdos -
An inherent strain method for residual stresses in drilling
E. Feulvarch * , J. Roux , J. Servières , K. Chenegrin
Main Organizer:
Prof.
Herbert Mang
(Vienna University of Technology, Austria)
Chaired by:
Prof. Herbert Mang
(Vienna University of Technology, Austria)
-
Framework for Identifying Bridge Damping using Instrumented Three-Mass Vehicle
J. Yang * , C. Wu -
Shifted Resonance in High-Speed Rail Bridges Considering VBI Effects
J. YAU * -
Efficient Pretwisted Element for Buckling Analysis of Pretwisted Members Under Various Loading Conditions
Y. Yang * , D. Guo , Y. Liu , H. Xu -
Testing and Optimization of Thick-Walled Aluminium Extrusions in Side-Crash Applications
E. Teixidó-Marquès * , D. Morin , O. Hopperstad , A. Assisi , M. Costas -
Approaches to Structural Optimisation of Multi-Chamber Aluminium Profiles for Side Crash Protection in Electric Vehicles
M. Costas * , T. Børvik , O. Hopperstad -
Differential Geometric Split of the Strain Energy of Proportionally Loaded Structures
H. Mang * , M. Aminbaghai
Wed, 03/09/2025
08:00 - 09:00
Reg.2
08:00 - 09:00
Reg.2
Main Organizer:
Prof.
Elias Cueto
(Universidad de Zaragoza, Spain)
Chaired by:
Prof. Nicolas MOËS
(UC-Louvain, Belgium)
-
Recent Advances in the Development of Reliable Neural Simulators Based on Graph Architectures
E. Cueto * , M. M. Iparraguirre , L. Tesán , P. Martins , A. Tierz , I. Alfaro , D. González , F. Chinesta
Main Organizer:
Prof.
WaiChing Sun
(Columbia University, United States)
Chaired by:
Prof. Nicolas MOËS
(UC-Louvain, Belgium)
Main Organizer:
Dr.
Matteo Ghidelli
(CNRS/LSPM, France)
Co-Organizer: Hosni Idrissi (Université Catholique de Louvain, Belgium)
Chaired by:
Dr. Matteo Ghidelli
(CNRS/LSPM, France)
-
Keynote
Investigating the interplay between biaxial multicracking of nanometric thin films and their magnetic properties: a nuanced separation of magnetoelastic and magnetostatic effects
D. Faurie * -
room temperature electron beam sensitive viscoplastic response of ultra-ductile Al/a-Al2O3 model system
H. Idrissi * -
Mitigating Shear Band Instability in Crystal/Glass Nanolaminates through Interface Engineering
M. Ezequiel * , E. Boltynjuk , J. Ivanisenko , P. Djemia , H. Hahn , M. Ghidelli -
Enhancing fracture resistance in advanced micro-ceramics via interface engineering
W. Cheng * , E. Rossi , J. Liang , J. Bauer , L. Petho , M. Sebastiani , J. Martins , R. Guillemet -
BCC-FCC interfacial deformation in MoTaWV base RHEA: influence of Cu as an FCC FORMER
M. Włoczewski * , D. Jarząbek , D. Oleszak
Main Organizer:
Dr.
Knut Andreas Meyer
(Chalmers University of Technology, Sweden)
Chaired by:
Dr. Knut Andreas Meyer
(Chalmers University of Technology, Sweden)
-
Physics-augmented neural networks meet data-driven identificaton – A two-step constitutive modeling framework
L. Linden * , K. Kalina , J. Brummund , B. Riemer , M. Kästner -
Cycle-domain plasticity modeling using machine learning
N. Talebi * , M. Ekh , K. Meyer -
Advanced Fracture Mechanics: Integrating Digital Image Correlation, Explainable Machine Learning, and Symbolic Regression
D. Melching * , T. Strohmann , F. Paysan , E. Dietrich , G. Requena , E. Breitbarth -
Modelling of Viscoplasticity and Material Hardening Using Neural Networks
M. Kroon * -
Hybrid Model/Data-Driven 3D Plasticity Simulations With J2 Plasticity Involving Kinematic Hardening
K. Karaca * , R. Peerlings , M. Geers -
Persistent Homology: a Morphological Descriptor Capturing Global Structural Characteristics
A. Milor * , M. Salvalaglio
Main Organizer:
Dr.
Guillermo Lorenzo
(University of A Coruña, Spain)
Chaired by:
Dr. Guillermo Lorenzo
(University of A Coruña, Spain)
-
Inverse problems for phase-field models with applications to personalized medicine
A. Agosti * , E. Beretta , C. Cavaterra , M. Fornoni , S. Luzzi , E. Rocca -
On particle cracking in Li-ion Si-based battery electrodes
H. Damsgaard Falck * , P. Isaksson -
Chemo-mechanical phase-field modeling of corrosion-fatigue degradation in reinforced concrete
A. Baktheer * , M. Gopakumar , G. Kenjo , F. Aldakheel -
A Phase-Field Micromechanics Framework for Sintering in Additive Manufacturing
Q. Yang * , A. Kirshtein -
A level set approach to modelling diffusional phase transformations under finite strains
E. Jacobsson * , M. Ristinmaa -
A Concurrent Workflow for the Topology Optimisation of Fibre Reinforced Composite Components of Increased Strength
G. Pissas * , S. Triantafyllou
Main Organizer:
Prof.
Ikumu Watanabe
(National Institute for Materials Science, Japan)
Chaired by:
Prof. Bjørn Holmedal
(Norwegian University of Science and Technology , Norway)
,
Prof. Hector Basoalto
(University of Sheffield, United Kingdom)
-
Keynote
Kinematic Distortional Hardening
B. Holmedal * , T. Manik -
Non-local Behaviour in Crystal Plasticity
H. Basoalto * -
Sistematic Generation of Mesoscale Concrete Mix-Designs With the Discrete Element Method
R. Lando * , B. Pomaro , G. Mazzucco -
Statistical Crystal Plasticity Predictions of Subsurface Microstructure Effects on the Variability of Deformation at the Surface
S. Engel * , J. Quinta da Fonseca , P. Shanthraj -
An Integrated Approach to Uncertainty Quantification for Phenomenological Crystal Plasticity Modelling of CuCrZr
M. Warner * , S. Engel , T. Flint , P. Shanthraj , J. Quinta da Fonseca
Main Organizer:
Prof.
Johanna Waimann
(Ruhr-University Bochum, Germany)
Chaired by:
Dr. Tobias Kaiser
(TU Dortmund University, Germany)
,
Prof. Johanna Waimann
(Ruhr-University Bochum, Germany)
-
Multiscale Homogenization of the Statistically Inhomogeneous Mesostructure of Moso Bamboo
L. Speichinger * , R. Förster , T. Böhlke -
Size-dependent Homogenization of Lamellar Materials using Strain Gradient Plasticity
C. Klein * , T. Böhlke -
A Meso-Microscale Mazars-like Damage Model for Heterogeneous Cement-Based Materials at Early Age
L. de Souza Kichel , T. dos Santos , R. Rossi * -
A new gradient-enhanced damage model with regularization based on ERVE
F. Liu * , D. Jantos , P. Junker -
Goal-oriented adaptivity based on distribution-enhanced homogenization framework for elasto-plastic composites
A. Tchomgue Simeu * , I. Caylak , R. Ostwald
Main Organizer:
Dr.
Aurélien Doitrand
(MATEIS, France)
Chaired by:
Mr. Sylvain Patinet
(ESPCI/CNRS, France)
,
Dr. Aurélien Doitrand
(MATEIS, France)
-
Keynote
Learning Microstructural Effects in Polycrystalline Superalloy Turbine Blades with Graph Neural Networks
V. Chiaruttini * , C. Bovet , A. Vattré -
The Atomistic Origin of Fracture Toughness in Amorphous Silica
G. Molnar * , E. Barthel -
Process Zone Description for Crack Initiation Assessment Using the Coupled Criterion
A. Doitrand * , G. Molnar -
Straight or curved crack at a V-notch tip?
H. Girard * , A. Doitrand -
Identification of a cohesive model for the interface in a ceramic copper assembly with a two scales strategy. Prediction of the resistance to delamination under cyclic thermal loadings.
C. TOSI * , R. Estevez
Main Organizer:
Phd.
Lars Edvard Blystad Dæhli
(Norwegian University of Science and Technology, Norway)
Chaired by:
Prof. Ahmed Benallal
(ENS Paris Saclay/CNRS, France)
,
Dr. Jose Rodriguez-Martinez
(University Carlos III of Madrid, Spain)
-
Keynote
Ductile Fracture at Decreasing Size Scales – Modelling versus Experiments
J. Faleskog * , S. Wang -
Ballistic Impact on Recycled 6xxx Aluminum Alloys
Y. Göçmen * , L. Dæhli , T. Børvik -
Phase Field Modeling of Ductile Fracture with Continuum-to-Discrete Crack Transition
C. Erdogan * , I. Yücel , T. Yalçinkaya
Main Organizer:
Prof.
Aylin Ahadi
(Mechanical Engineering Sciences, Division of Mechanics, Sweden)
Chaired by:
Dr. Oguz Umut Salman
(CNRS, France)
,
Prof. Aylin Ahadi
(Mechanical Engineering Sciences, Division of Mechanics, Sweden)
-
Strain gradient crystal plasticity modeling on size effects in nanoindentation
N. Binh * , E. Demir , J. Lian -
A Nonlinear Variational Model of Cracks and Dislocations
G. Engrand * , A. Ruffini , Y. Le Bouar , A. Finel -
Atomistic modeling of deformation and damage behavior of metal matrix composites
M. Maździarz * , S. Nosewicz -
From an Infinite-Well to a Single-Well Description in Mesoscopic Crystal Plasticity
A. Ahadi , O. Salman * -
Keynote
Mechanical Properties of ZrCuAlx Thin Film Metallic Glasses and Nanolaminates: Experiments And First-Principle Calculations
M. Ghidelli *
Main Organizer:
Dr.
Wei Tan
(Queen Mary University of London, United Kingdom)
Chaired by:
Prof. Burigede Liu
(University of Cambridge, United Kingdom)
,
Dr. Wei Tan
(Queen Mary University of London, United Kingdom)
-
Keynote
Design and Optimization of Granular Materials for Mechanically Adaptive Structures
Y. Wang * -
Structural Optimization Based On A Generalized Governing Equation
Y. Liu , W. Tan * -
Material Design via Constitutive Optimization
Y. Liu * , W. Tan -
Topology Optimization of Mechanical Metamaterials Via Finite Strain Energy-based Estimation of Macrostructural Properties
K. Kambayashi * , I. Watanabe , J. Zhou -
Macroscopic Elastic-Plastic-Damage Constitutive Model for Lattice Metamaterials
R. Abu Al-Rub * , N. Baghous , I. Barsoum
Main Organizer:
Dr.
Rena C. Yu
(Universidad de Castilla-La Mancha, Spain)
Chaired by:
Dr. Rena C. Yu
(Universidad de Castilla-La Mancha, Spain)
,
Prof. Yujie Huang
(North University of China, China)
-
Keynote
Multi-scale damage modeling for quasi-brittle solids based on stochastic phase-field theory
L. Hai , Y. Huang * -
A Chemo-Mechanical Model For Simulating Sulfate Attack In Concrete Structures
F. Rooyackers , R. Luimes , A. Suiker , F. Clemens , E. Bosco * -
On the modeling of 3D fracture propagation in quasi-brittle materials using Configurational Mechanics
M. REQUE CRESPO * , L. CRUSAT CODINA , I. CAROL VILARASAU -
Multiscale fracture behaviour in 3D-printed UHPC: a micro-XCT-based experimental methodology
H. Zhang * , J. Wu , Y. Huang -
Meso-scale stochastic simulation study on damage and fracture of ultra-high performance concrete (UHPC)
Y. Huang * , L. Hai , H. Zhang
Main Organizer:
Prof.
Giovanni Garcea
(University of Calabria, Italy)
Chaired by:
Dr. Domenico Magisano
(Università della Calabria, Italy)
,
Prof. Giovanni Garcea
(University of Calabria, Italy)
-
A Fully Coupled Thermo-Viscoelastic Isogeometric Model for Shape Memory Polymer Beam Systems with Applications to Cardiovascular Stents
F. Rahmani Karkevandi * , G. Ferri , E. Marino -
Fiber Beam Model Using Finite Particle Method for Dynamic Fracture Simulation of Concrete Structures
Y. Yu * -
Nonlinear Closed-Form Multilayer Frame Element With Axial-Flexure-Shear Coupling In Multiple Embedded Discontinuities
G. Juarez Luna * , Á. Martínez-Miranda -
Full-Field Experimental Characterization and 3D-to-Shell Model Transformation of Plastic Films for Packaging Applications
P. Hao * , N. Tang , F. Gilabert -
Refined Flexibility-Based Model For Nonlinear Inelastic Analysis of Fire Exposed SRC Frames
C. CHIOREAN *
Main Organizer:
Dr.
Yinan Cui
(Tsinghua University, China)
Chaired by:
Prof. Giacomo Po
(University of Miami, United States)
,
Dr. Yinan Cui
(Tsinghua University, China)
-
Keynote
Coupled cluster and dislocation dynamics modeling of irradiation creep and growth
M. Maron , Y. Li , G. Po * -
Keynote
Advanced structural material design based on computational simulation and data-driven method
Z. Liu * -
Physics-Informed Machine Learning for Multi-Mechanism Creep Modeling in Zirconium: Integrating Jogged Screw Dislocation Dynamics
A. Cui * , Y. Cui , N. Ghoniem -
A Discrete-Continuous Model of Coupled Plasticity and Fracture
Z. Li * , Z. Zhuang , Z. Liu , Y. Cui
Main Organizer:
Dr.
Emanuela Bosco
(Eindhoven University of Technology, Netherlands)
Chaired by:
Prof. Artem Kulachenko
(KTH Royal Institute of Technology, Sweden)
,
Dr. Emanuela Bosco
(Eindhoven University of Technology, Netherlands)
-
Constrained Bending of Paperboard Analysed with Digital Image Correlation and Finite Element Simulations
E. Borgqvist * , E. Lacaj , F. Claesson , A. Bäckström , S. Hall , M. Wallin , M. Ristinmaa -
Reduced Order Multiscale Modelling of Paperboard
G. Boman * , M. Ristinmaa , M. Wallin , E. Borgqvist -
Long-term Deformation of Paper as a function of Cosolvent mass transport in Latex Prints
J. van den Hoek * , I. Schraven -
A nonlinear anisotropic hypo-elastic continuum model for paper materials and its relation to statistical micro-mechanics
M. Fallah * , P. Lenarda , M. Paggi -
Experimental and Numerical Study of the Behavior of Angle-Ply Carbon Fibre Reinforced Thermoplastic Laminates
N. Pham * , K. Raju , V. Tan , T. Tay -
Non-Affine Elastic Anisotropy Model with Applications to Biological Tissue
S. Skatulla * , C. Sansour , G. Limbert
Main Organizer:
Prof.
Valentina Salomoni
(University of Padova, Italy)
Chaired by:
Prof. Riccardo Fincato
(Padova University, Italy)
,
Prof. Masayuki Arai
(Tokyo University of Science, Japan)
-
Keynote
Modeling Corrosion & Fatigue In Bcc Metals With Unified Mechanics Theory
C. Basaran * , H. Lee , H. Fakhri , R. Ranade , H. Egner , A. Lipski , M. Piotrowski , S. Mroziński -
Comparative study on effect of yield surface in CDM-like constitutive law
Y. Shintaku * , K. Terada -
A Modified Continuum Damage-Coupled Viscoplastic Model for Simulating Static and Cyclic High-Temperature Loading
J. Halamka * , M. Bartošák -
Fatigue Performance of Steel Components for Offshore Energy Structures
I. Gavriilidis * , T. Papatheocharis , S. Karamanos
Main Organizer:
Prof.
Laura De Lorenzis
(ETH Zurich, Switzerland)
Chaired by:
Prof. Elias Cueto
(Universidad de Zaragoza, Spain)
-
Variational Phase-Field Modeling of Fracture: Towards Second-Generation Models
L. De Lorenzis * , O. Boolakee , J. Weverbergh , M. Geier
Main Organizer:
Prof.
Jean Philippe Ponthot
(University of Liège, Belgium)
Chaired by:
Prof. Elias Cueto
(Universidad de Zaragoza, Spain)
-
Recent Advances in the Particle Finite Element Method for Fluid-Structure Interactions and Multi-Physics Problems
J. Ponthot * , D. Bogucki , E. Fernandez , S. Fevrier , M. Lacroix , R. Boman
Main Organizer:
Dr.
Knut Andreas Meyer
(Chalmers University of Technology, Sweden)
Chaired by:
Prof. Markus Kästner
(TU Dresden, Germany)
-
Optimal Plate-Lattices via Inverse Design
P. Meyer * , T. Tancogne-Dejean , D. Mohr -
Latent Space Denoising Diffusion for Inverse Design of Elastoplastic Microstructures with Targeted Constitutive Models
N. Vlassis * -
Ensemble Kalman Filter-Based Data Assimilation of Dislocation Behavior in Dislocation Dynamics Simulation
H. Murata * , S. Ihara , K. Endo , M. Muramatsu -
NN-Based Inverse Design Of Spinodoid Architected Materials
A. Otto * , M. Rosenkranz , A. Raßloff , K. Kalina , M. Kästner -
Bayesian Active Learning for Determining Physical Parameters in SOFC Anode Degradation
R. Jeela * , G. Tosato , M. Ahmad , M. Wieler , A. Koeppe , B. Nestler , D. Schneider -
Efficient direct and indirect inverse design of architected materials
M. Kästner *
Main Organizer:
Prof.
Ikumu Watanabe
(National Institute for Materials Science, Japan)
Chaired by:
Prof. Joao Quinta da Fonseca
(University of Manchester, United Kingdom)
,
Dr. Kazuki Shibanuma
(The University of Tokyo, Japan)
-
Keynote
Comparing Crystal Plasticity Predictions with Experimental Measurements of Strain Localization at the Microstructural Scale
J. Quinta da Fonseca * , S. Engel , L. Gonzalez , C. Liu , M. Atkinson -
Multiscale modeling strategy for predicting fatigue life of steel based on crack growth simulation
K. Shibanuma * -
Combining 3D-EBSD and Crystal Plasticity Modelling to Explore the Influence of Thermal Residual Stress on Hydride Formation in Zircaloy-4
L. Gonzalez Duque * , M. Maric , J. Donoghue , P. Frankel -
Reformulation of peridynamics theory from integral form to particle integral representation
M. Arai * , R. Inui -
Texture-Dependent Mechanical Behavior of Lattice Structures: A CPFEM Analysis Using an Open-Source Polycrystal Generator for Abaqus
H. Moradi Asadkandi * , B. Holmedal , O. Sture Hopperstad , T. Mánik
Main Organizer:
Prof.
Johanna Waimann
(Ruhr-University Bochum, Germany)
Chaired by:
Prof. Johanna Waimann
(Ruhr-University Bochum, Germany)
,
Dr. Sonja Hellebrand
(University of Duisburg-Essen, Germany)
-
FFT-based phase-field fracture modelling of ductile heterogeneous microstructures
T. Schneider * , M. Kästner -
FE-FFT-based Modeling of Thermo-mechanically Coupled Effects in Polycrystalline Materials
C. Gierden * , A. Schmidt , J. Waimann -
Computational Multiscale Modelling of Grain Boundary Resistivity
T. Kaiser * , D. Güzel , H. Bishara , G. Dehm , A. Menzel -
Generating Polycrystal Microstructures with Prescribed Higher-Order Texture Tensors
M. Krause * , M. Schneider -
Multiphase-field Modeling of Microstructure Evolution during Solid-state Processing of Al alloys
H. Nanayakkara , R. Chafle * , B. Klusemann -
Laser Beam Welding: A Microstructural Insight
P. Hartwig * , L. Scheunemann , J. Schröder
Main Organizer:
Dr.
Aurélien Doitrand
(MATEIS, France)
Chaired by:
Dr. Gergely Molnar
(INSA de Lyon / CNRS, France)
,
Dr. Aurélien Doitrand
(MATEIS, France)
-
Keynote
Leveraging dissipation mechanisms at different length-scales to delay interface crack propagation
F. Daghia * -
Accelerating Multiscale Damage Prediction in Heterogeneous Brittle Materials Using Macro Clustering
S. Chaouch * , J. Yvonnet -
Characterizing Size Effects on Fracture Toughness of Nuclear Structural Material Eurofer97 Through Numerical Analysis
I. Aydiner * , I. Unsal , D. Terentyev , T. Yalçinkaya -
Perturbation length measurement from full-field data and matched asymptotic expansion
T. Duminy * , A. Doitrand , R. Estevez
Main Organizer:
Phd.
Lars Edvard Blystad Dæhli
(Norwegian University of Science and Technology, Norway)
Chaired by:
Phd. Lars Edvard Blystad Dæhli
(Norwegian University of Science and Technology, Norway)
,
Prof. Ahmed Benallal
(ENS Paris Saclay/CNRS, France)
-
A homogenized model for strongly hardening porous materials
J. Hure * -
Gaussian Process Regression Prediction of Yield and Failure in Porous Materials with Random Void Distributions under Plane Stress
S. osovski * , A. Shmuel -
A void-based rationale for modelling hydrogen embrittlement
H. Yu * , J. He , Z. Zhang -
The Effect of Microstructural Inertia on Plastic Localization and Void Growth in Porous Solids
N. Hosseini , T. Virazels , N. Jacques , J. Rodriguez Martinez * -
In-situ XCT supported finite element analysis of void growth in Al-1050 under ductile damage
W. Wu * , C. Niordson , G. Winther
Main Organizer:
Dr.
Ju Liu
(Southern University of Science and Technology, China)
Chaired by:
Mr. Chongran Zhao
(Southern Univerisity of Science and Technology, China)
-
Rate-dependent Fracture of Hydrogels due to Water Diffusion
T. Lu * , Y. Yang , T. Wang -
A tube-based constitutive model of brain tissue with inner pressure
S. Tang * , Z. Yu -
Structure-Preserving Integrators for a Family of Finite Viscoelasticity Models Based on the Green-Naghdi Assumption and Generalized Strains
J. Guan * , J. Luo , J. Liu -
A Nonlinear Anisotropic Viscoelastic Model Based On The Green-Naghdi Kinematic Assumption With Rank-Four Structural Tensors
J. Luo * , J. Guan , C. Zhao , J. Liu
Main Organizer:
Dr.
Wei Tan
(Queen Mary University of London, United Kingdom)
Chaired by:
Dr. Wei Tan
(Queen Mary University of London, United Kingdom)
,
Prof. Burigede Liu
(University of Cambridge, United Kingdom)
-
Enhancing Training Efficiency in Generalised Structure to Property Mapping Using Adaptive Sampling and Transfer Learning
J. Bowbrick Smith , M. Whiting , T. Chatterjee , K. Bandara , M. Weismann , H. Attar , A. Harris , I. Mohagheghian * -
Computational design of metamaterials with controllable mechanical-transport-thermal properties
J. Fu * , W. Tan -
Physics Pretrained Neural Operator: Solving Parametrized PDEs on Complex Domains
R. Wu * , N. Kovachki , B. Liu -
Machine Learning-Guided Design of Auxetic Structures for Optimal Energy Absorption
S. Farshbaf * , N. Dialami , M. Cervera -
3D variational autoencoder for fingerprinting microstructure volume elements
M. White * , M. Atkinson , A. Plowman , P. Shanthraj -
Multiphysics Modelling the Fracture Behaviours of Silicon-Based Anode Particles in Lithium-ion Batteries
J. Yang * , W. Tan
Main Organizer:
Dr.
Rena C. Yu
(Universidad de Castilla-La Mancha, Spain)
Chaired by:
Prof. Hui Zhang
(North University of China, China)
,
Dr. Lu Hai
(The Hong Kong Polytechnic University, China, Hong Kong)
-
A numerical analysis of concrete damage in contact with non-cementitious materials
B. Selma * -
Effectiveness of TRC jackets for the strengthening of concrete elements after elevated temperatures: Experimental and analytical investigation
L. Shen * , Z. Liang , C. Wan -
Numerical modeling of the fatigue-induced self-healing in concrete
H. Chen , R. Yu * , G. Ruiz , Y. Yu
Main Organizer:
Dr.
Yinan Cui
(Tsinghua University, China)
Chaired by:
Prof. Z.L. Liu
(Tsinghua University, China)
,
Dr. Yun Tian
(Peking University Third Hospital, China)
-
Keynote
Biomechanics Induced Osteogenesis in Additive Manufacturing Technology for Repairing Limb Bone Defects
Y. Tian * , Z. Chen , Y. Hu , G. Si , B. Liu , T. Zhu -
Keynote
A data driven multiscale framework for understanding hardening and fatigue of alloys
Y. Cui * , X. Liu , Z. Liang , F. Tan , E. Martinez Saez , G. Po -
A crystal plasticity-based creep model considering the concurrent evolution of point defect, dislocation, grain boundary, and void
Z. Liang * -
Intelligent extraction of pseudo-defect-modes for damage detection in plate-like structures
J. Chen * , Z. Li
Main Organizer:
Prof.
Michel Raous
(Laboratoire de Mécanique et d'Acoustique - CNRS - France, France)
Chaired by:
Prof. Michel Raous
(Laboratoire de Mécanique et d'Acoustique - CNRS - France, France)
,
Prof. Peter Wriggers
(Leibniz University of Hannover, Germany)
-
Keynote
Approximation of frictional contact using nitsche’s methods in 3d elasto-plastic industrial problems
C. Pozzolini * -
A primal-dual active set method for superelasticity, finite-strain elastoplasticity, and contact: application to modeling of stent devices
F. Bonaldi * , M. Barboteu , S. Dumont , F. Jourdan , R. Mansour , T. Nguyen -
A Moore-Penrose Continuation Algorithm for Large Deformation Contact Problems
A. Pepin * , J. Deteix , S. Léger Auffrey -
Signed distance field enhanced virtual element method for large deformation frictional contact in flexible multi-body system
C. Liu * -
Influence of surface roughness on the mechanics of nano-objects
H. Iteney , T. Cornelius , O. Thomas , J. Amodeo *
Main Organizer:
Dr.
Karo Sedighiani
(Tata Steel, Netherlands)
Chaired by:
Dr. Karo Sedighiani
(Tata Steel, Netherlands)
-
Keynote
Effective toughness of heterogeneous materials: application to polycrystals
J. Segurado * , P. Aranda -
Modelling Fatigue Crack Nucleation from Macroscopic Defects in Steels with Martensitic Microstructure
D. Khan * , D. Leonetti , J. Maljaars -
Coupled Crystal Plasticity and Extended Finite Element Modelling of Fracture in Tungsten at the Microscale
A. Taipale * -
Understanding Deformation and Failure in Dual Phase Titanium Alloys via CPFEM
A. Siddiq * , B. Wynne , S. Rahimi
Main Organizer:
Dr.
Matteo Ghidelli
(CNRS/LSPM, France)
Co-Organizer: Hosni Idrissi (Université Catholique de Louvain, Belgium)
Chaired by:
Dr. Matteo Ghidelli
(CNRS/LSPM, France)
-
Keynote
Nitrogen ion implantation in refractory high entropy metallic glesses: structural and mechanical effects.
D. Jarzabek * , K. Stepniak -
Engineering nanoscale heterogenities in thin film metallic glasses via alloying with immiscible elements
E. Boltynjuk * , M. Ezequiel , F. BIGNOLI , V. Tavakkoli , A. Ahmadian , D. Chassaing , M. Eusterholz , D. Faurie , P. Djemia , H. Hahn , Y. Ivanisenko , M. Ghidelli -
Structural influences and temperature-dependent deformation in bulk metallic glasses
S. Pomes * , N. Adachi , M. Wakeda , T. Ohmura -
Combining Numerical And Experimental Methods For Interfacial Bonding Strength Measurement In Microscale For Multiscale Modeling
P. Jenczyk * , D. Jarząbek , S. Nosewicz
Main Organizer:
Dr.
Emanuela Bosco
(Eindhoven University of Technology, Netherlands)
Chaired by:
Dr. Emanuela Bosco
(Eindhoven University of Technology, Netherlands)
,
Prof. Artem Kulachenko
(KTH Royal Institute of Technology, Sweden)
-
An Efficient Approach for Modelling the Process-Induced Residual Stresses in Polymer Composites
D. Panda * , H. Subramanian -
A Compact Model for the Micro- to Macroscopic Deformation Behavior of Natural Short-Fibre Reinforced Semi-Crystalline Polymer Composites
T. Barriere * , N. NIANG , S. Holopainen , V. Placet -
A Cohesive Element-Based and Crystallization-Enhanced Thermomechanical Model for Thermoplastic Overmolding
X. Li * , T. Liu , M. Tabib , B. Boes , M. Giersberg Sola , M. Valsecchi , J. Cui , H. Celik , R. Dahlmann , C. Hopmann , S. Kumar , J. Fish , J. Simon -
Using Spatial Random Fields to Model Microstructural Variations in Macroscale Simulations
J. Pfeifer * , J. Neumann , J. Simon -
A Concurrent Multiscale Approach for Modeling Moisture-Induced Deformations and Inelastic Effects in Fibrous Networks
E. D'Allestro * , A. Brandberg , A. Kulachenko -
Simulating the Scattering Patterns from Cell Wall Microfibril Structures in Wood
T. Verho * , J. Linnosmaa , A. Paajanen
Main Organizer:
Prof.
Valentina Salomoni
(University of Padova, Italy)
Chaired by:
Prof. Cemal Basaran
(University at Buffalo, The State University of New York, United States)
,
Prof. Yuichi Shintaku
(University of Tsukuba, Japan)
-
Inelastic finite element analysis for notched specimen by damage-coupled inelastic constitutive equation of P91 steel
A. Motoki * , M. Arai -
Crystal Plasticity Modeling of Cyclic Plasticity in Ni-based Superalloys
S. Chaudhary , N. Pai , B. Sudhalkar , I. Samajdar , A. Patra * -
Prediction of Fatigue Behavior of Metallic Materials based on Three Possible Work Energies Affecting to the Fatigue
H. CHANG * , F. GHIGLIONE -
Experimental Parameters Of A Connection Model For I-Beam And Tubular Column Mrf Structures
J. Paredes , A. Cardona * , C. Dávalos , L. Garza
Thu, 04/09/2025
08:00 - 09:00
Reg.3
08:00 - 09:00
Reg.3
Main Organizer:
Prof.
Nicolas MOËS
(UC-Louvain, Belgium)
Chaired by:
Prof. Laura De Lorenzis
(ETH Zurich, Switzerland)
Main Organizer:
Prof.
Anna Pandolfi
(Politecnico di Milano, Italy)
Chaired by:
Prof. Laura De Lorenzis
(ETH Zurich, Switzerland)
-
A coupled Multiscale Model of the Human Cornea Accounting for the Collagenous Microstructure and the Extracellular Matrix
A. Pandolfi * , C. Miller , M. De Bellis
Main Organizer:
Prof.
Katarzyna Kowalczyk-Gajewska
(Institute of Fundamental Technological Research, Polish Academy of Sciences, Poland)
Chaired by:
Prof. Katarzyna Kowalczyk-Gajewska
(Institute of Fundamental Technological Research, Polish Academy of Sciences, Poland)
-
Mechanisms of Irradiation-Induced Hardening Ii Fe–Ni–Cr Alloys: A Molecular Dynamics Study
A. Ustrzycka * , J. Dominguez-Gutierrez -
Prediction of localized necking in orthotropic sheet metals using a damage-coupled plasticity model
K. Morey * , S. Keralavarma -
Impact of material gradation on necking patterns in functionally graded ductile bars
M. GALVÃO , T. DOS SANTOS† , G. VADILLO * , J. RODRÍGUEZ-MARTÍNEZ -
Mechanism of Unstable Plastic Flow of Austenitic Steels at Cryogenic and Room Temperature
K. Nalepka *
Main Organizer:
Dr.
Ju Liu
(Southern University of Science and Technology, China)
Chaired by:
Phd. Jiashen Guan
(Southern University of Science and Technology, China)
-
Keynote
Viscoelasticity Modeling without Tears
J. Liu * , J. Guan , C. Zhao , J. Luo -
A Rational Framework of Finite Viscoelasticity: Dissipation Potential and Non-Newtonian Effects
C. Zhao * , X. Sun , H. Yuan , J. Liu -
Hot-pressing Welding of Vitrimer
L. An * , T. Wang
Main Organizer:
Prof.
Michel Raous
(Laboratoire de Mécanique et d'Acoustique - CNRS - France, France)
Chaired by:
Prof. Peter Wriggers
(Leibniz University of Hannover, Germany)
,
Prof. Michel Raous
(Laboratoire de Mécanique et d'Acoustique - CNRS - France, France)
-
Keynote
Viscoelastic Contact Hysteresis with Green’s Function Molecular Dynamics: Methods and Insights
M. Müser * -
Can Two-scale Methods be used in Contact Mechanics, where Scale Separation is Lacking? A Stochastic Approach.
F. Pérez-Ràfols * -
The Role of Adhesion and Friction in the Buckling Behavior of Spherical Shells
R. Nazari * , R. Aghababaei , A. Papangelo , M. Ciavarella -
From Knots to Networks: Unraveling Mechanical Behavior with a Robust Beam Contact Model
E. Pescialli * , K. Karapiperis , D. Kochmann
Main Organizer:
Dr.
Karo Sedighiani
(Tata Steel, Netherlands)
Chaired by:
Prof. Martin Diehl
(KU Leuven, Belgium)
-
Continuum Modelling of Dislocation Microstructures Under Tribological Loading
K. Schulz * , S. Lee , B. Katzer -
Crystal Plasticity Simulation of Rough Zinc Coating for Wear Predictions
K. Pandey * , P. Baart , E. Van der Giessen , F. Maresca -
Strain Gradient Crystal Plasticity Models for Shear Band Formation in Polycrystals
A. Lame Jouybari * , S. El Shawish , L. Cizelj -
An Interior Point Method for Rate-Independent Single Crystal Plasticity at Finite Strains Including Latent Hardening
F. Steinmetz * , L. Scheunemann -
Efficient Augmented Lagrangian Algorithm(s) for Rate-Independent Crystal Plasticity Theory
A. Niehüser * , J. Mosler -
Gaussian Process Regression for Texture Analysis: Reconstruction and Homogenization
B. Li , P. Breitkopf , L. Cauvin *
Main Organizer:
Prof.
Kenjiro Terada
(Tohoku University, Japan)
Chaired by:
Prof. Caglar Oskay
(Vanderbilt University, United States)
-
Keynote
Homogenization of Dynamic Electroactive Fluid Saturated Porous Soft Structures
E. Rohan * , F. Moravcová , V. Lukeš -
Multiscale Partial Dislocation Dynamics: Simulation of Spatially Correlated Heterogeneous Noise Sources in Solid Solution Alloys
X. Liu * , Y. Cui , G. Po -
A note on the role of phase transformation schemes to analyze residual stresses
S. Hellebrand * , L. Scheunemann , D. Brands , J. Schröder -
Multiscale and Multiphysics Framework for Thermo-Structural Analysis of Heat Exchangers in Sustainable Aircraft
G. Ramgobin * , H. Thompson , A. Khan , M. Muir , G. de Boer -
Computational Homogenization of Shell-based Cellular Materials towards Microphysics-informed Continuum
L. Liu * , F. Liu , D. Zenkert , M. Åkermo , M. van Maris , J. Hoefnagels , M. Fagerström
Main Organizer:
Dr.
Gustavo Castelluccio
(Universidad de Cranfield, United Kingdom)
Chaired by:
Dr. Gustavo Castelluccio
(Universidad de Cranfield, United Kingdom)
-
Keynote
Iterative Experiments and Modelling of Dislocation Boundary Alignment
G. Winther * -
A Validation Strategy for Multi-Component Dynamic Impact Simulations
A. Oudes * , M. Costas , J. Martinez , D. Morin -
Parameter Uncertainty in Plasticity Models
G. Castelluccio * -
Bayesian Calibration and Uncertainty Quantification for Modeling BCC Single Crystals
S. Lee * , D. Luscher , T. Nguyen , H. Cho -
A full-range model for microstructure sensitive fatigue life prediction in Aluminum
G. Zarzoso * , J. Segurado
Main Organizer:
Dr.
Guoyu Lin
(Synopsys, Inc., United States)
Chaired by:
Dr. Guoyu Lin
(Synopsys, Inc., United States)
,
Dr. Fabian Welschinger
(Robert Bosch GmbH, Germany)
-
Keynote
An anisotropic phase field model for the multiscale analysis of fracture in short fiber reinforced polymers
F. Welschinger * , A. Fajardo Lacave , L. De Lorenzis -
Unified Viscoelast-Viscoplastic-Damage Modeling of Snow at Different Loading Conditions
A. Moeineddin * , J. Platen , M. Kaliske -
Computational Model for Fracture Considering Effects of Residual Stresses
S. Hirobe * , K. Oguni -
Elasto-Plastic and Nonlocal Damage in Multiscale Microlayer Model for Concrete at Finite Strains
R. Riko * , J. Platen , M. Kaliske -
A discrete mechanics perspective on bond-based peridynamics
P. Prateek * , G. Capobianco , S. Leyendecker
Main Organizer:
Prof.
Lucival Malcher
(University of Brasília, Brazil)
Chaired by:
Prof. Lucival Malcher
(University of Brasília, Brazil)
,
Dr. Tiago Silva
(INEGI, Portugal)
-
Keynote
Numerical analysis of micro machining parameters for LDED deposited steel based on the Johnson–Cook model
D. de Oliveira , T. Emanuel Silva * , M. Pereira Gonçalves , L. Regueiras , O. Emadinia , A. de Jesus , L. Malcher -
Coupling Grain Growth, Fluid Flow, and Anisotropic Mechanical Behavior at the Track Scale through Thermo-Fluid-Metallurgical-Mechanical Simulations
Z. Li * , M. Bellet , C. Gandin , M. Upadhyay , Y. Zhang -
Towards Optimum Plate Shapes: Modeling and Simulation of the Transient Material Flow During Heavy Plate Hot Rolling
A. Nemetz * , E. Parteder , P. Reimer , T. Kaltenbrunner , B. Heise , J. Lekue , T. Gross , S. Falkner , R. Egger , K. Zeman -
Modeling Milling Processes for surface finish prediction in additively manufactured parts using the PFEM
J. Carbonell * , H. Bakhshan , F. Rastellini , E. Oñate -
Efficient and Accurate Part-Scale Simulations for Metal Additive Manufacturing Using a Local-Global Virtual Domain Approach
C. Moreira * , M. Chiumenti , J. Baiges , M. Caicedo , M. Cervera
Main Organizer:
Prof.
Amit Acharya
(Carnegie Mellon University, United States)
Co-Organizer: Jorge Viñals (University of Minnesota, United States)
Chaired by:
Prof. Amit Acharya
(Carnegie Mellon University, United States)
-
Crystal Plasticity at the Mesoscale with Non-Linear Elasticity and GL (Z, 3) Invariance
G. Tejedor * , S. Queyreau , U. Salman -
Micro-to-macro homogenization for elasto-plasticity driven by dislocation motion
F. Rindler * -
New insights into grain boundary kinetics by phase-field crystal modeling
M. Punke * , M. Salvalaglio -
Modeling and analysis of disclinations and dislocations with the Airy potential method
P. Cesana * -
Physical analysis on the dislocation avalanche statistics in Cu using Dislocation Dynamics Simulations
S. Queyreau * , M. Aissoui , O. Salma , C. Kahloun -
A Crystallographic Dislocation Mechanics Model
A. Graini , J. Viñals , A. Acharya , M. Upadhyay *
Main Organizer:
Prof.
Kathrin Welker
(Helmut-Schmidt-University / University of the Federal Armed Forces Hamburg, Germany)
Chaired by:
Mr. Chaitanya Kandekar
(Helmut-Schmidt University/, Germany)
,
Prof. Kathrin Welker
(Helmut-Schmidt-University / University of the Federal Armed Forces Hamburg, Germany)
-
Keynote
A Shape Optimization Approach to Compute Fracture Propagation Paths in Tensile and Shear Benchmark Tests
T. Suchan * , W. Wollner , K. Welker -
Simulation Of Thermal Fatigue Crack Intiation and Propagation Around Cooling Holes In TBC Based On a Damage-coupled Inelastic Constitutive Model
X. HAN * , M. ARAI , Y. MENG -
Damage identification in structural health monitoring using model order reduction and data-assimilation techniques
S. Hijazi * , C. Gräßle -
On an Optimization Framework for Damage Localization in Structures
O. Saleem * , T. Suchan , N. Rauter , K. Welker -
A two-step damage detection method based on guided waves and ultrasonic vibration for composite stiffened panels
J. Chen , M. Radzienski , Z. Li * , W. Ostachowicz
Main Organizer:
Dr.
Remi Dingreville
(Sandia National Laboratories, United States)
Chaired by:
Dr. Remi Dingreville
(Sandia National Laboratories, United States)
-
Interaction-Based Deep Material Network Architecture for Damage Multi-Scale Simulations
L. Wu * , L. Noels -
Variational Deep Material Network: Efficient Extrapolation of Homogenized Material Properties with Uncertainty
A. Robertson * , D. Shin , A. Lenau , R. Lebensohn , R. Dingreville -
Orientation-aware interaction-based deep material network for polycrystalline materials with diverse microstructures
T. Wei * , W. Wan , C. Chen -
Investigating Deep Material Networks as Representative Microstructures for the Mechanical Behavior of Composites.
A. Lenau * , A. Robertson , D. Shin , R. Lebensohn , R. Dingreville -
An Orientation-aware Interaction-based Deep Material Network Surrogate Model for Efficient Multiscale Simulation of Carbon-Reinforced Concrete
S. Lu * , T. Wei , A. Khedkar , M. Kaliske , C. Chen -
Strengthening Deep Material Networks with Offline Training Using Local Field Data
D. Shin * , R. Lebensohn , R. Dingreville
Main Organizer:
Dr.
Julien Guénolé
(CNRS, France)
Chaired by:
Dr. Julien Guénolé
(CNRS, France)
-
Keynote
Quantification of Plastic Anisotropy in Nanoporous Metals: Effect of Topology and Crystalline Orientation
C. Ruestes * , E. Roque , J. Segurado -
Stress-induced amorphization is a transformation induced plasticity
J. Furstoss * , D. Pino-Munoz , P. Carrez , P. Hirel , V. Delbecq , P. Cordier -
Investigation of Dislocation Dynamics in the Presence of Obstacles Using Neural Network Potential
H. Mori * -
Mechanical Properties of Ultra Small Nanoparticles Using First Principles Calculations
L. Pizzagalli * , R. Polisetty , J. Durinck , S. Brochard , J. Furstoss , J. Godet , M. Ramirez , A. Varas , F. Valencia -
Atomistic Modeling of Interfacial Cracks by Machine-Learning Potentials
D. Matsunaka *
Main Organizer:
Dr.
Matteo Ghidelli
(CNRS/LSPM, France)
Co-Organizer: Hosni Idrissi (Université Catholique de Louvain, Belgium)
Chaired by:
Dr. Matteo Ghidelli
(CNRS/LSPM, France)
-
Keynote
How To Evaluate Hardening Under Irradiation From Micropillar Compression Tests?
I. GEFFLOT , R. HENRY , B. RADIGUET , S. ROULAND * -
A combined experimental-computational study of the compression of hemispherical nanoporous gold nanoparticles
B. Engelman , S. Mathesan , T. Fedyaeva , A. Bisht , E. Rabkin , D. Mordehai * -
Bulk density measurements of small solid objects using lase confocal microscopy
A. Kilmametov * , S. Walheim -
Defect-driven Microstructural Evolution and Mechanical Characterization of Complex Concentrated Alloy Thin Films
A. CURAM , M. Konstamtakopoulou * , G. Abadias , P. Djemia , C. Ricolleau , M. Ghidelli -
Modelling the cross-slip of the screw dislocation in UO2
J. Suchorski , A. Pivano , L. Dupuy , J. Amodeo *
Main Organizer:
Phd.
Lars Edvard Blystad Dæhli
(Norwegian University of Science and Technology, Norway)
Chaired by:
Dr. Borja Erice
(Mondragon Unibertsitatea, Spain)
,
Phd. Lars Edvard Blystad Dæhli
(Norwegian University of Science and Technology, Norway)
-
Autoencoder-based non-intrusive model reduction of damage simulations: prospects and challenges
J. Kehls , S. Reese , T. Brepols * -
A trust region algorithm for finite-strain plasticity with strongly coupled hardening and porosity evolution
P. Areias * -
Implementation of GISSMO for a FFT-Based Microstructure Simulation of a Dual Phase Martensitic Steel
D. Downey * , M. Ponga de la Torre -
A Three-Field Stabilised Finite Element Formulation for a Finite Strain Damage Model
R. Codina , I. Castañar * , J. Baiges -
Arbitrary-Order Virtual Element Methods for High-Order Phase-Field Modeling of Ductile Fracture
Y. Leng * , H. Mourad
Main Organizer:
Prof.
Samuel Forest
(Armines Mines ParisTech, France)
Chaired by:
Prof. Peter Wriggers
(Leibniz University of Hannover, Germany)
-
Strain Ageing Phenomena in Nickel-Based Superalloys and Zinc-Coated Steel Sheets: Experiments and Modelling
S. Forest * , F. Billon , N. Guillermin , A. Zouari
Main Organizer:
Prof.
Alessandro Reali
(University of Pavia, Italy)
Chaired by:
Prof. Peter Wriggers
(Leibniz University of Hannover, Germany)
Main Organizer:
Dr.
Andreas Prahs
(Karlsruhe Institute of Technology (KIT), Germany)
Chaired by:
Dr. Andreas Prahs
(Karlsruhe Institute of Technology (KIT), Germany)
,
Dr. Daniel Schneider
(Karlsruhe Institute of Technology (KIT), Germany)
-
Keynote
Microstructure evolution during shear creep loading in Ni-based superalloys
Y. Le Bouar * , M. Cottura , B. Appolaire , A. Finel -
A Multiphase field Approach to Crystal Plasticity for Investigating Mechanical Anisotropy in Additive Manufactured High Entropy Alloys
L. Schöller * , A. Prahs , D. Schneider , X. Li , B. Nestler -
Multiphase-Field Method for a Thermomechanical Theory Including Latent Heat
B. Hu * , A. Prahs , M. Reder , D. Schneider , B. Nestler -
Insights on Chemo-mechanical Coupling in Phase-field Approaches
T. Kannenberg * , A. Prahs , B. Nestler , D. Schneider -
Phase-Field Method with the Order Parameter as an Internal State Variable
A. Prahs * , D. Schneider , B. Nestler -
Modeling and Simulation of Incompatible Deformations in Solids with dislocation microstructure : A Strain-Gradient Approach with Finite Element Implementation
N. Van Goethem * , S. Amstutz , T. Lê
Main Organizer:
Prof.
Katarzyna Kowalczyk-Gajewska
(Institute of Fundamental Technological Research, Polish Academy of Sciences, Poland)
Chaired by:
Prof. Katarzyna Kowalczyk-Gajewska
(Institute of Fundamental Technological Research, Polish Academy of Sciences, Poland)
-
Full-field Analysis of Strain and Lattice Rotation Heterogeneity in Multicrytals with Intragranular Cylindrical Voids
M. Kursa , S. Virupakshi , M. Maj , S. Musiał , K. Kowalczyk-Gajewska * -
Texture and Mechanical Parameters Modifications During Asymmetric Rolling
K. Wierzbanowski * , D. Byrska-Wójcik , M. Ostachowska , M. Wróbel , R. Bloniarz , A. Baczmanski -
Plastic Deformation of Magnesium Alloy - Modelling Based on Neutron Difraction Measurements
A. Baczmanski * , A. Ludwik , P. Kot , S. Wronski , M. Wronski , K. Wierzbanowski , G. Farkas -
A GNN-LSTM multi-task learning framework for predicting grain orientation and stress in polycrystalline materials
Y. Yuan * , R. Juan , J. Lian
Main Organizer:
Dr.
Karo Sedighiani
(Tata Steel, Netherlands)
Chaired by:
Prof. Manas Upadhyay
(Ecole Polytechnique, France)
-
Keynote
Modelling the Performance of Bainitic Steels Based on Full Field Crytsal Plasticty Simulation
F. Roters * , M. Diehl , F. Gallardo Basile -
Microstructure and Anisotropy Evolution During Rolling-Induced Deformation
K. Sedighiani * , M. Abspoel , J. Moerman , M. Scholting , E. Atzema -
Crystal Plasticity Simulations of Texture Evolution and 3D Microstructure Characterization of 6XXX Aluminium Alloys with High Recycling Content
E. Cantergiani * , T. Kammbach , Z. Liang , F. Roters , F. Garcia Moreno , L. Gonzalez Duque , J. Quinta da Fonseca , J. Robson -
Crystal Plasticity Finite-Element Homogenisation: From experiments to simulation without RVE
J. Galán López *
Main Organizer:
Prof.
Kenjiro Terada
(Tohoku University, Japan)
Chaired by:
Prof. Eduard Rohan
(University of West Bohemia, Czechia)
-
Surrogate Computational Homogenization of Nonlinear Composite Beam
Y. Yamanaka * , N. Hirayama , K. Terada -
Topology Optimization of Multiscale Structure Using a Surrogate Homogenization Model Under Finite Deformation
A. Nakamura * , Y. Yamanaka , N. Sukulthanasorn , K. Terada -
Accuracy and Efficiency of Clustering Methods Applied to Crystal Plasticity Simulations
S. Torres Olivares * , R. Peerlings , M. Geers
Main Organizer:
Dr.
Gustavo Castelluccio
(Universidad de Cranfield, United Kingdom)
Chaired by:
Dr. Gustavo Castelluccio
(Universidad de Cranfield, United Kingdom)
-
Keynote
Interfacing Continuum Dislocation Dynamics and Crystal Plasticity
A. El-Azab * -
Bayesian parameter identification of nonlinear constitutive laws with strain localization
A. Jafari * , E. Chatzi , J. Unger -
Finite Element Simulation of Plasticity, Emergent Weak Points, and Conditional Sensitivity to Microstructure
A. Tallman * -
Incorporation of Physics-based Strengthening Coefficients into Phenomenological Crystal Plasticity Models
N. Prabhu * , M. Diehl
Main Organizer:
Prof.
Michele Marino
(University of Rome Tor Vergata, Italy)
Chaired by:
Prof. Michele Marino
(University of Rome Tor Vergata, Italy)
,
Prof. Daniel Garcia-Gonzalez
(Universidad Carlos III de Madrid, Spain)
-
Keynote
Analysis of heterogeneous microstructures based on micromagnetic FE simulations
M. Vorwerk * , J. Schröder -
Multi-scale experimental characterisation and modelling of the thermo-electro-mechanical behaviour of 3D printed conductive composites
J. Crespo-Miguel * , S. Lucarini , S. Garzon-Hernandez , E. Martinez-Pañeda , D. Garcia-Gonzalez -
Data-Driven transient chemo-mechanics
L. Stainier * -
Cytoskeletal Dynamics Impact Glioblastoma Mechanics on Magneto-Active Substrates
D. Garcia-Gonzalez * -
Hydrogel-based Bioprinting: a Chemomechanical Modelling Framework for Multifunctional Optimization
L. Zoboli , F. Chirianni , P. Gaziano , A. Gizzi , G. Vairo , M. Marino *
Main Organizer:
Dr.
Guoyu Lin
(Synopsys, Inc., United States)
Chaired by:
Dr. Fabian Welschinger
(Robert Bosch GmbH, Germany)
,
Dr. Guoyu Lin
(Synopsys, Inc., United States)
-
Hydrogen Embrittlement Failure Prediction Using a Gradient Enhanced Damage Approach
L. Yin , S. Eckardt , R. Ahmed , G. LIN * -
Continuum Damage Model for Simulating Hydrogen Embrittlement in Steels
A. Stamou * , S. Karamanos -
The microstructural origins of hydrogen-assisted failure
C. Alleman * , F. Leon Cazares -
On the thermo-mechanical modeling of crack propagation and healing in a brittle solid
L. Salmon * , S. Lejeunes , M. Garajeu , A. Socié , V. Blanc , T. Helfer -
Comparative Analysis of Nonlocal Approaches for Modeling Ductile Fracture
I. Unsal * , C. Erdogan , T. Yalçinkaya -
A Thermodynamically Consistent Finite Strain Viscoplasticity-Micromorphic Damage Model for Cyclic Loadings: Formulations and Numerical Implementations
H. Ge * , B. Yin , D. Zhao , M. Kaliske
Main Organizer:
Prof.
Lucival Malcher
(University of Brasília, Brazil)
Chaired by:
Prof. Lucival Malcher
(University of Brasília, Brazil)
,
Dr. Tiago Silva
(INEGI, Portugal)
-
Part-scale thermo-mechanical modeling of laser powder bed fusion process considering the effect of grain structure
Y. ZHANG * , T. VO , M. Bellet , C. Gandin -
CutFEM-Based Simulation Framework for Studying Friction Stir Welding Process Parameters and Tool Shapes
H. Venghaus * , M. Chiumenti , J. Baiges , D. Juhre , N. Dialami , E. Lorenz , Z. Lin -
Finite-element structural modelling of laser welds. Application to aluminium connections in Li-ion prismatic batteries
D. Cioni , D. Morin , A. Strating , S. Kizio , M. Langseth , M. Costas * -
Self-Drilling Screws Under Shear Joining Medium Thickness Steel Sheets
A. dos Santos Garcia * , C. López-Colina Pérez , M. Serrano López , M. Colino García -
Multi-Objective Optimization of Metal Plate Hysteretic Energy Dissipators for Enhanced Structural Performance**
C. Dávalos * , J. Paredes , C. Ramírez -
Mathematical modeling of the effect of hydrogen on the mechanical behavior of metals: assessing the maximum defect size in pipelines
L. Barros , D. Cachulo , J. Pereira , A. de Jesus , A. Araújo , R. Cardoso , J. Araújo , L. Malcher *
Main Organizer:
Prof.
Amit Acharya
(Carnegie Mellon University, United States)
Co-Organizer: Jorge Viñals (University of Minnesota, United States)
Chaired by:
Prof. Jorge Vinals
(University of Minnesota, United States)
-
Semi-Coherent Interfaces and Dislocation Kinematics in Quasicrystals
M. De Donno * , L. Angheluta , K. Elder , M. Salvalaglio -
Variational modelling and dynamics of wedge disclinations
M. Morandotti * -
A tensor density measure of topological charge and kinematics in three dimensional solids and nematics
C. Schimming , J. Vinals * -
Electric field effects in nematic liquid crystals
G. di Fratta , V. Slastikov , A. Zarnescu * -
Stress Generation and the Effects of Stress on Grain Growth
C. Qiu , J. Han , M. Salvalaglio , G. Rohrer , D. Srolovitz * -
Constitutive modeling of materials for vascular access in hemodialysis
L. Horný * , Z. Sobotka , N. Petrová , Z. Petrivý , J. Kronek , H. Chlup , K. Filip , J. Urban -
A unified basis for defect kinematics in elastic solids and liquid crystals
A. Acharya *
Main Organizer:
Prof.
Fadi Aldakheel
(Leibniz Universität Hannover, Germany)
Chaired by:
Prof. WaiChing Sun
(Columbia University, United States)
,
Prof. Oliver Weeger
(TU Darmstadt, Germany)
-
Machine Learning-Aided Inverse Design of Porous Metamaterials
F. Aldakheel * , P. THIEN NGUYEN , Y. HEIDER -
On the Formulation of Data-Assisted Constitutive Models for Non-Linear Solid Mechanics
A. Cornejo * , R. Rossi -
Surrogate Modeling of Crystal Plasticity Using Graph Neural Networks for Microstructural Design
A. Safi * , P. Campos , F. Bock , B. Klusemann -
Multiscale modeling of metamaterials and complex composite structures using the Empirical Interscale Finite Element Method (EIFEM)
J. HERNÁNDEZ * , E. SOUDAH -
Investigation of a Machine Learning-assisted Material Point Method for Buckling Analysis
M. Suzuki * , M. Muramatsu -
AtomProNet: Data flow to and from machine learning interatomic potentials in materials science
M. Galib , M. Isiet , M. Ponga *
Main Organizer:
Dr.
Remi Dingreville
(Sandia National Laboratories, United States)
Chaired by:
Dr. Remi Dingreville
(Sandia National Laboratories, United States)
-
Keynote
Equivariant neural networks with applications to constitutive modeling
K. Garanger , J. Rimoli * -
Identification of Non-Smooth Differential Equations Using Artificial Intelligence Methods
M. Adiouane * , C. Pozzolini , C. Grenat -
Physics-guided and Mechanism-inspired AI for Computational Engineering
S. Lee * -
A neural network framework for thermoviscoplasticity
R. Jones * , J. Fuhg , T. Seidl -
A physics-informed neural network with built-in conservation laws for mechanical super-resolution
R. Dingreville * , V. Oommen , A. Robertson , D. Diaz , C. Alleman , Z. Zhang , A. Rollett , G. Karniadakis
Main Organizer:
Dr.
Julien Guénolé
(CNRS, France)
Chaired by:
Prof. Dan Mordehai
(Technion - Israel Institute of Technology, Israel)
-
Atomic-Scale Simulations of Deformations of Nanotwinned Gold Thin Films
A. George * , P. Godard , S. Brochard -
Predicting yield stress in nano-precipitate strengthened alloys: A Discrete Dislocation Dynamics approach
M. Sudmanns * , M. Kolár , E. Antillon , C. Stewart , M. Beneš , J. El-Awady -
Modeling Size Effects in the Elastoplastic Behavior of Nanocomposites
D. Bach , L. Cauvin * , D. Brancherie , D. Kondo -
Interfaces as Dislocation Density Fields for Bridging Length Scales in Nanomechanics
J. Guénolé * , H. Kharouji , Y. Woguem , V. Taupin
Main Organizer:
Prof.
Jinhyun Choo
(Seoul National University, Republic of Korea)
Chaired by:
Prof. Jinhyun Choo
(Seoul National University, Republic of Korea)
,
Prof. Claudio Tamagnini
(University of Perugia, Italy)
-
Spiral Shear Fracture Initiation and Propagation During Cavity Contraction
Y. Gao * , E. Detournay -
Robust geometric processing of complex discontinuities for non-conforming meshes
C. Souza * , C. Mendes , D. Cavalcanti , C. Mejia , D. Roehl -
Robust analytic solution for predicting reservoir elastic strain and stress responses
L. Paullo Munoz * , C. Mejia , J. Rueda , D. Roehl -
Impact of CO2 storage mechanisms on pressure builup for fault reactivation assessment
C. Mejia * , J. Rueda , D. Roehl -
A unified numerical framework for the soil and fluid coupling problem considering mixture and separation
Y. zhang * , C. Liu -
Phase-Field Drucker-Prager Model For Concrete
V. Dunic * , M. Zivkovic , D. Rakic -
Three-Dimensional Hydromechanical Simulation of Naturally Fractured Reservoirs Using an Embedded Finite Element Approach
D. Cavalcanti * , C. Souza , C. Mejia , C. Mendes , I. de-Pouplana , G. Casas , D. Roehl -
Advanced continuation and iterative methods for slope stability analysis in 3D
S. Sysala * , M. Béreš , S. Bérešová , T. Luber
Main Organizer:
Prof.
Kathrin Welker
(Helmut-Schmidt-University / University of the Federal Armed Forces Hamburg, Germany)
Chaired by:
Mr. Tim Suchan
(Helmut Schmidt University / University of the Federal Armed Forces Hamburg, Germany)
,
Prof. Kathrin Welker
(Helmut-Schmidt-University / University of the Federal Armed Forces Hamburg, Germany)
-
An approach for a novel multiscale partitioned framework for predicting collapse of buildings under fire loads
C. Kandekar * , M. Rottmann , W. Weber -
Nonlinear behaviour of guided ultrasonic waves in fibre metal laminates using hyperelastic material properties
W. NIKIEMA * , N. Rauter -
Fast Isogeometric Analysis and Shape Optimization of Lattice Structures
T. Hirschler , M. Chasapi * , P. Antolin , A. Buffa -
Inverse Material Characterization Using Deep Learning
J. Ghaffari Motlagh * , F. Fathi , P. Jimack , J. Brigham
Fri, 05/09/2025
08:00 - 09:00
Reg.4
08:00 - 09:00
Reg.4
Main Organizer:
Prof.
Kenjiro Terada
(Tohoku University, Japan)
Chaired by:
Prof. WaiChing Sun
(Columbia University, United States)
-
Surrogate Computational Homogenization for Inelastic Composites and Room for Quantum Acceleration Strategies
K. Terada * , Y. Yamanaka , A. Nakamura
Main Organizer:
Prof.
Zhuo Zhuang
(Tsinghua University, China)
Chaired by:
Prof. WaiChing Sun
(Columbia University, United States)
Main Organizer:
Dr.
Karo Sedighiani
(Tata Steel, Netherlands)
Chaired by:
Dr. Karo Sedighiani
(Tata Steel, Netherlands)
-
Incorporating Texture Evolution in Multistage Forming: A Computationally Efficient Uncoupled Yield Locus Update Approach
S. Rathore * , K. Sedighiani , C. Soyarslan , E. Atzema , T. Boogaard -
A Multiphyiscs Model to Study Copper Metallization
M. Diehl * , J. Velo -
Thermomechanical coupling and dislocation evolution: A framework for energy partitioning in plastic deformation
N. Lalovic * , T. Böhlke -
Plasticity and Damage in BCC Steels at Low Temperatures
F. Shen * , Z. Zhang , S. Münstermann -
A crystal plasticity-based reversible phase transformation model for Ti49Zr20Hf15Al10Nb6 high-entropy alloy
H. Wang * , C. Liu -
Micromechanical Effects of Particle Morphology on Void Nucleation in Aluminum Alloys
J. Pechac * , C. Alleman
Main Organizer:
Dr.
Abramo Agosti
(University of Pavia, Italy)
Chaired by:
Dr. Abramo Agosti
(University of Pavia, Italy)
-
Combining supervised and nonlinear compressed sensing for Electrical Impedance Tomography
D. Lazzaro , S. Morigi , L. Ratti * -
Self-Supervised Deep Equilibrium Learning for Sparse-Angle CT Reconstruction
T. Bubba , M. Santacesaria * , A. Sebastiani -
Ensuring Model Consistency in Inverse Problems: Application to Industrial Aluminium Quenching
F. Pachnek * , P. Simon , A. Nemetz , K. Zeman -
Identifying Early Tumour States in a Cahn-Hilliard-reaction-diffusion Model
A. Agosti , E. Beretta , C. Cavaterra , M. Fornoni * , E. Rocca -
Reconstructing the Early States of Prostate Cancer Growth
E. Beretta , C. Cavaterra , M. Fornoni , G. Lorenzo * , E. Rocca -
A diffusion-driven growth model using a phase-field approach for simulation of brain tumor
M. Soleimani * , M. Esmaeilzadeh , P. Junker
Main Organizer:
Prof.
Fadi Aldakheel
(Leibniz Universität Hannover, Germany)
Chaired by:
Prof. Fadi Aldakheel
(Leibniz Universität Hannover, Germany)
,
Prof. Dennis Kochmann
(ETH Zurich, Switzerland)
-
Physics-augmented neural network material models for hyperelasticity with softening
J. Fey , D. Klein , O. Weeger * -
Variational Physics Informed Neural Networks formulation for solid mechanics
D. Rodopoulos * , P. Pantidis , N. Karathanasopoulos -
New Insights Into Strain-Induced Rubber Crystallisation and Fracture: A Precise and Efficient Physics-Augmented Neural Network Approach
F. Dammaß * , K. Friedrichs , K. Kalina , M. Kästner -
Unsupervised identification of constitutive laws using neural networks in a thermodynamically consistent framework guided by the CRE and mCRE methods
N. Klebi * , L. Chamoin -
Automatic learning of physics-constrained space heterogeneous PDEs for defect identification in slender mechanical structures
R. Ferrier * , S. Drapier , M. Kadri -
Leveraging Data Distillation and Budget Forcing for Automated Constitutive Modeling in Material Science
H. Li *
Main Organizer:
Dr.
Remi Dingreville
(Sandia National Laboratories, United States)
Chaired by:
Dr. Remi Dingreville
(Sandia National Laboratories, United States)
-
Keynote
Prediction of Static Equilibria of Landau Phase Transitions using PINN
S. Lee , H. Chung * -
AI-Driven Elastoplastic Bone Model Considering Biological Variability for Automotive Safety
C. Saenz-Betancourt * , D. Draper , P. Wernicke , F. Duddeck , S. Peldschus -
A Machine Learning-Based Method for Deriving Explicit Formulas for Stress Evaluation, Sizing, and Strength Assessment in Pressure Vessel Design
P. AMUZUGA * -
Optimization of Sensor Deployment and Deep Learning Models for CFRP-Reinforced Concrete Structures
H. CHUNG * , J. KIM , B. SONG , W. JUNG , H. KANG -
Accelerating the Quantification of Orientation Dependent Damage Caused by Voids Using Machine Learning
D. Montes de Oca Zapiain * , N. Aragon1 , H. Lim
Main Organizer:
Dr.
Aris Tsakmakis
(Technische Universität Darmstadt, Germany)
Chaired by:
Dr. Aris Tsakmakis
(Technische Universität Darmstadt, Germany)
,
Prof. Christian Linder
(Stanford University, United States)
-
Keynote
A Multiscale Phase-field Formulation to Capture the Fracture Behavior of Strain-Crystallizing Polymers
C. Linder * , P. Arunachala -
An elastic-visco-plastic phase-field fracture model to capture brittle and ductile failure in ice
T. Hageman * , E. Martinez-Paneda -
Simulating Fracture in Glacier Ice: On a Phase Field Method for a Nonlinear Viscoelastic Material
R. Sondershaus * , A. Humbert , R. Müller -
Simulation of Fatigue Crack Propagation in Ductile Materials under Non-Proportional Loading Conditions. Part I: Modeling of Deformation-Induced Plastic Anisotropy
A. Gibb * , A. Tsakmakis , M. Vormwald -
Simulation of Fatigue Crack Propagation in Ductile Materials under Non-Proportional Loading conditions. Part II: Phase Field Modeling of Crack Propagation
A. Tsakmakis * , A. Gibb , M. Vormwald
Main Organizer:
Prof.
Anna Pandolfi
(Politecnico di Milano, Italy)
Chaired by:
Prof. Anna Pandolfi
(Politecnico di Milano, Italy)
,
Prof. Ludovic Noels
(University of Liege, Belgium)
-
Towards Quantum Computational Mechanics
B. Liu * -
Novel Strategies for Solving Structural Design Optimization Problems with Quantum Annealing
F. Key * , L. Freinberger -
Quantum Computing applications in structural optimization
B. Chen * -
Exponentially Efficient Quantum Implementation of Analytic Function States Using Direct Construction of Tensor Train
K. Endo * , M. Muramatsu , K. Z. Takahashi -
Elasto-Plastic Finite Element Simulations on Quantum Annealers
V. Nguyen , L. Wu , F. Remacle , L. Noels * -
Quantum Methods for Spectrally Discretised Non-periodic Partial Differential Equations
E. Febrianto * , Y. Wang , F. Cirak
Main Organizer:
Prof.
Peter Wriggers
(Leibniz University of Hannover, Germany)
Chaired by:
Prof. Peter Wriggers
(Leibniz University of Hannover, Germany)
-
Higher Order Inelastic Virtual Elements
J. Korelc * -
One-point quadrature for second order virtual element method in elasto-plasticity
Y. Choi * , B. Tobias , P. Junker -
Virtual Element Method for Cohesive Crack Propagation in Multiphase Composites
H. Choi *
Main Organizer:
Prof.
Yuki Yamakawa
(Tohoku University, Japan)
Chaired by:
Prof. Yuki Yamakawa
(Tohoku University, Japan)
,
Prof. Koichi Hashiguchi
(MSC Software, Ltd., Japan)
-
Topology optimization with material interpolation using subloading surface model of elastoplasticity
S. Nara , H. Hoshiba , K. Nishiguchi , J. Kato * -
Subloading-overstress elasto-viscoplastic model: Numerical implementation and application to rate-dependent material responses
K. Kamiya * , S. Aoki , Y. Yamakawa , K. Hashiguchi -
Extended subloading-overstress model with temperature-dependence
K. Hashiguchi * -
Consistent Extension of General Hyperelastic Frameworks to Viscoplasticity: Numerical Challenges and Solutions
D. Ana * , C. Schmidt , W. Wall -
Extended Subloading Surface Cam-clay Plasticity Model with Rotational Hardening: Hyperelastic-Based Formulation, Numerical Implementation, and Application to Cyclic Loading
M. Tanaka * , K. Sakamoto , Y. Yamakawa , K. Hashiguchi -
A Comprehensive Elasto-Plastic Model for Paper and Paperboard Materials
N. Kopic-Osmanovic * , E. Prume , G. Kloppenburg , J. Simon
Main Organizer:
Prof.
Jacinto Ulloa
(University of Michigan, United States)
Chaired by:
Prof. Jacinto Ulloa
(University of Michigan, United States)
,
Prof. Kostas Karapiperis
(EPFL, Switzerland)
-
Thermodynamics-informed machine learning with interpretable internal variables
K. Karapiperis * -
Physics-Pretrained Neural Operator Solving Parametrized PDEs on Complex Domains
B. Liu * -
Homogenization of Mechanical Metamaterials
J. Ulloa * , P. Ariza , J. Andrade , M. Ortiz -
Generalised Implicit Material Networks for constitutive modelling
F. Vincent * , F. Masi , V. Acary -
Discovering Neural Network Elastoplasticity from Kinematic Observations
G. Barkoulis Gavris * , W. Sun
Main Organizer:
Prof.
Jinhyun Choo
(Seoul National University, Republic of Korea)
Chaired by:
Prof. WaiChing Sun
(Columbia University, United States)
,
Prof. Jinhyun Choo
(Seoul National University, Republic of Korea)
-
Mitigating Small Cut Instabilities in the Material Point Method through Mesh Aggregation
W. Coombs * , R. Bird , G. Pretti -
Rigid Body Interaction with Highly Deformable Solids, a Material Point Approach in 3D
R. Bird * , W. Coombs , C. Augarde , Y. Sharif , M. Brown , G. Carter , C. Macdonald , K. Johnson -
Non-Smooth Implicit Material Point Method for Contact and Non-Associated Plasticity of Geomaterials
L. Guillet * , V. Acary , F. Bourrier , O. Goury -
Semi-Implicit MPM with Weighted Least Square B-spline Shape Function for Unsaturated Soil
S. Hidano * , R. Nomura , S. Moriguchi , K. Terada -
VMS-Stabilized Mixed Implicit Material Point Method for Finite Deformation Elastoplastic Analysis of the Modified Cam-Clay Model
R. Sugai * , R. Nomura , S. Moriguchi , K. Terada -
Length-regularized B-Splines MPM For Discretizaton-Insensitive Simulation of Large Deformation Strain Localization
J. Choo * , Y. Zhao , J. Kang
Main Organizer:
Prof.
Kenjiro Terada
(Tohoku University, Japan)
Chaired by:
Prof. Frederic Legoll
(ENPC, France)
-
Variational Multiscale Enrichment Method for Dynamic Response of Hyperelastic Materials at Finite Deformation
A. Arora , C. Oskay * -
Higher order homogenization of Direct Numeric Simulation results of a mock plastic bonded explosive
N. Miller * , T. Allard , R. Regueiro , E. Jensen , F. Di Gioacchino , P. Javadzadeh -
On the Multi-Scale Modelling of Strain-Softening and Localisation with Second-Order Homogenisation: Unravelling the Interplay between Mesh-Dependent Effects Across Spatial Scales
G. Fonseca Gonçalves * , I. Rodrigues Lopes , F. Andrade Pires -
Realistic Micromechanical Modeling of Nano-Particle Based Composites
V. Kolli , I. Scheider * , K. Schneider , D. Giuntini , C. Cyron -
Identification of Arbitrary Yield Surfaces on High Performance Computers
J. Platen * , J. Storm , J. Zängler , M. Kaliske
Chaired by:
Dr. Narges Dialami
(UPC-CIMNE, Spain)
-
Accelerating Phase-Field Fracture Simulations with the I-FENN Framework
L. Svolos * , P. Pantidis , R. Saji , D. Abueidda , M. Mobasher -
A NEIM-FFT Approach for 3D Contact Modeling of Layered Heterogeneous Materials
K. Liu * , Z. Jiang , H. Song , F. Borodich , X. Jin -
A Unified Micromechanical Method for Thermomechanical Behavior of Heterogeneous Materials with Cracks
X. Zheng * , B. Yang , P. Li , K. Liu , F. Borodich , X. Jin -
Numerical Simulation of Buried Explosives inside Concrete and Rock using Massively-Parallel Coupled CFD-CSD Techniques. Comparison of Cap and Three Yield Surface Material Models.
O. Soto * , M. Giltrud , J. Baum , R. Lohner -
Developing Efficient Data-driven Predictive Tools for Geotechnics
M. Ouyang * , A. Petalas , W. Coombs , C. Augarde -
Cross-Scale Energy Dissipation Mechanisms during the Sliding of Elastic-Plastic Rough Solids
F. BORODICH , Z. GAO * , Z. JIANG , O. SAVENCU , X. JIN
Main Organizer:
Prof.
Peter Wriggers
(Leibniz University of Hannover, Germany)
Chaired by:
Prof. Eduardo de Souza Neto
( Eduardo de Souza Neto, Swansea University, United Kingdom, United Kingdom)
Main Organizer:
Prof.
Dennis Kochmann
(ETH Zurich, Switzerland)
Chaired by:
Prof. Eduardo de Souza Neto
( Eduardo de Souza Neto, Swansea University, United Kingdom, United Kingdom)
-
AI-Accelerated Multiscale Modeling
D. Kochmann * , H. Le Clézio , K. Karapiperis , Y. Hollenweger , B. Lu , L. Zheng , S. Kumar
International Centre for Numerical Methods in Engineering Barcelona, Spain
complas_sec@cimne.upc.edu/ Telf. + 34 - 93 405 46 94
Copyright © 2024 CIMNE, All Rights Reserved. Terms of service
complas_sec@cimne.upc.edu/ Telf. + 34 - 93 405 46 94
Copyright © 2024 CIMNE, All Rights Reserved. Terms of service